Previous Post
Next Post


I know what you’re thinking. The AccuTrigger is perfect. It’s the literal embodiment of American ingenuity and bootstrappy innovation. I’m not saying you’re wrong because I think the AccuTrigger is a really good trigger that has forced other companies (ahem Ruger) to fix the triggers in their bargain priced guns. And out of the box, the AccuTrigger’s a fine 3.5 to 6 pound bangswitch. However, when you attempt to tune it below a pound, like Savage did with the LRP model, it becomes a finicky little thing. Enter Rifle Basix and their SAV 1 . . .

If you remember my original review of the LRP, I praised the trigger (when it worked) for its crisp, glass rod-like qualities. However, when you ran the bolt hard at all, like for a fast follow-up shot, the sear would trip and lock the mechanism. Our prolific commenting ‘smith, Dyspeptic Gunsmith, had this to say in the comments section of my original LRP review…

Sigh. There’s no free lunch, folks. To get a pull down into the “ounces” of trigger pull with a single stage trigger, you need to reduce the sear engagement down to a mere few thousandths of an inch. The steel in the trigger must be stoned and polished to a very fine finish, the angles must be oh-so-correct and the engagement surfaces must be perfectly parallel. In short, with modern manufacturing tolerances… this probably isn’t reliably accomplished most of the time. If you really want a “target trigger” down in the single-digit ounces of pull (and most shooters have NO idea how light this is, nor how to manage their trigger finger to not jump the shot), quit trying to accomplish this on the cheap. Pony up for a trigger designed to do this, not a single stage trigger that has been adjusted and hacked into doing it. Want to see a trigger that was designed, from the start, to be adjusted reliably down into the eight ounce range? Go look at the Anschutz 5018 trigger group, or a Jewell, etc. You’ll notice that they’re two-stage triggers, they’re reliable and… they cost $300 and up.


As usual, Dyspeptic was on target. The trigger issues that plagued that rifle, along with finicky accuracy issues, relegated it to a safe queen in favor of rifles that worked well on my father in law’s monthly trips to his buddy’s south Texas hunting ranch.

Over the Christmas break, I inquired as to the whereabouts and usage of the lowly Savage. As I’d suspected, it hadn’t moved in a year. I offered to take the the LRP home to “fix it” assuming my father in law would pay for parts. I’d supply the labor and tools. He happily agreed.


My next call was to Northland Shooter’s Supply. And yes, it was an actual call. Jim Briggs runs a very small outfit at Northland and he aims to ensure a great customer service experience. He’s found that online ordering doesn’t accomplish that goal as well as answering the phone and walking customers through their order.

In addition to the barrel I ordered (more on that in another article), Jim walked me through the differences between the Rifle Basix Model 1 and Model 2 trigger replacements. Jim offers the Model 1, geared for hunting and recreation, for $85. The Model 2, meant for competition, is $155. I elected to use the Model 1 as this rifle spends less time on the benchrest circuit and more time out at the ranch clanging steel and occasionally rolling a pig foolish enough to come to the feeder.


Installation is a snap thanks to the included instruction manual from Rifle Basix. Rip out the old AccuTrigger, take the opportunity to degrease everything, and pop the new unit in. The Model 1 is adjustable for sear engagement, weight of pull, and overtravel. Coarse adjustment took about five minutes, with fine tuning taking an extra ten or so. Adjusted down to its lowest weight, less than a pound, it easily replicates the old trigger’s habits for tripping when the sear engagement is set to its lowest setting. To have a “safe” trigger at that weight requires a sear engagement adjustment that makes for a gritty trigger pull.

Adjusting the weight up to a much more realistic three pounds allows the sear engagement to be tuned for a very crisp engagement without any fear of safety issues. The vigorous bolt cycling that rendered the AccuTrigger worthless does nothing to trip up the Rifle Basix trigger, and the three pound trigger is more than adequate for a rifle of this nature. I found that to make the trigger truly safe for the most vigorous bolt slamming I could muster required a trigger with just a touch, and I mean a touch, of creep.

I managed to put ~140 rounds through this rifle during break in, and I had no trouble with tripping the trigger during vigorous cycling like I did with the AccuTrigger. Otherwise, it was an utterly unremarkable trigger. It installed quickly, adjusted easily, and now provides a crisp three pound pull with an almost imperceptible amount of grit.

Specifications: Rifle Basix SAV-1 Replacement Trigger

  • Replacement for
    • Standard trigger or AccuTrigger™
    • All 110 Type Rifles and Edge/Axis Rifles
    • Models: 10, 11, 12, 110, 16, 111, 112, 114 & 116
    • All 110 type centerfire triggers manufactured after January 1966
    • Savage / Stevens Model 200 and Savage 210 slug gun
  • Weight of pull range: 14oz.-3.0lbs.
  • Adjustable for sear engagement, safety engagement, overtravel, and weight of pull
  • Colors: Black or Silver
  • Price: $89.95

Ease of Installation & Adjustment * * * * *
Total swap out takes about fifteen minutes including time to adjust the trigger to the desired weight and sear engagement. The only tools you’ll need are a small flat-bladed screwdriver and needle nose pliers for the removal and installation of the C-clip that holds the trigger pivot pin.

Function * * * *
If you’re looking for a safe trigger with a pull weight less than about a pound and a half, you’ll have to deal with some creep. To get a crisp, safe trigger, you’ll need to adjust it closer to three pounds. The unfortunate fact is that the original sear is still used as part of this installation, so you’re at the mercy of Savage’s original manufacturing tolerances. In this case, the sear appeared to be made of roughly stamped steel. For <$100, this is a good fix for the limitations of the AccuTrigger in the LRP.

Overall Rating * * * *
The majority of the AccuTriggers I’ve come across have been thoroughly satisfactory, and I don’t think the Rifle Basix Trigger really solves anything for those guns. However, if you have a non-AccuTrigger-equipped rifle you don’t like or an LRP with a trippy factory trigger, this is a very affordable way to fix that problem. In my experience, it wasn’t able to deliver a crisp, safe, one-pound trigger, but it also didn’t cost $300. Or more.

Previous Post
Next Post


  1. I wouldn’t mind throwing an accutrigger onto my axis, but i will likely just go this route instead.

    • Is that possible? I was thinking there was some difference between non Accu trigger rifles that kept you from swapping them out?

  2. Most Savage fans do not like the Basics trigger. Some of their top choices are the Savage factory Accu-Target trigger (different than the Accu-trigger). Even the Accu-trigger can often be adjusted down often to 3 oz although the Accu-Target Trigger was designed to be set lighter than the average Accu Trigger.

    Other people like the SSS trigger or the Evolution trigger and both of these can be adjusted as light as 3 oz. beating out the Basics trigger easily.

  3. If you enjoy accidental discharges then the Rifle Basics trigger is for you. The sad part is the RB trigger will produce a 1 pound break point 9 out of 10 times. You finally think you have the trigger set and surprise! AD- To even have a Savage target trigger being compared to the unsafe rifle basics is not only false it is not responsible. There are two types of Rifle basics trigger owners. The first has already had accidental discharges with them and second will soon be very surprised when it happens to them. I’m all for light triggers but not at the expense of safety. There should be a survey of owners who have returned them (RB triggers) due to not holding adjustment or just plain going off when the bolt is closed. Just witnessed it for a second time yesterday at a match. Guy closed the bolt and the RB trigger launched another bullet into the trees.

  4. I have installed two RB triggers, Savage 110 .260 Rem build and Rem 700 build, both are absolutely wonderful! No issues and very safe!

  5. Ive owned a Rifle Basix trigger for 8 years now in an old Savage model 111. To get it truly perfect requires a ton of time and messing with minute increments with the set screws. It took me over an hour if I recall getting the trigger set perfect, it breaks at 10oz and is 100% reliable. I recently had to adjust the pull weight up because 10oz is no where near safe for hunting and I plan on using this rifle as my hunting rifle now, so its set to 1.75lbs and is still incredibly crisp and clean. I don’t think most people have the patience to work with minute adjustments to the screws to find the perfect trigger pull, so I’m not surprised that some people think that this trigger is terrible.

    If you do decide to get this trigger for your savage rifle, don’t forget to use plenty of Loctite once you get it set, You won’t be able to get it directly on the threads (unless you use softer stuff) but getting some on the screws after they’ve been properly adjusted is better than nothing. It’s how I’ve maintained my 10oz trigger pool safely for the last 8 years.

  6. I have several Rifle Basix triggers in my guns and Yes it did accidentally discharge. I have since adjusted the trigger properly and never had another issue with an accidental discharge. I am one happy customer with their triggers.

Comments are closed.