Home » Blogs » Diamondback SDR Review | The 6-Shot Snub-Nose Done Right

Diamondback SDR Review | The 6-Shot Snub-Nose Done Right

Mike Hardesty - comments 22 comments
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver
ImageProductPrice
Diamondback SDR

Diamondback SDR

Check Price

In this world of semi-auto sub-compacts and other self-shuckers, I don’t doubt that some shooters wonder if they still make revolvers – especially those designed for concealed carry.  

In a word, yup. They still do. Snub-nosed revolvers are still gracing gun shop shelves. 

And, snub-nosed revolvers have evolved. 

One of the first guns to be called a “snub-nose” was the 2-inch Colt Detective Special. It made its appearance in 1927. Later, Smith & Wesson entered the game. The Chief’s Special came about in 1950. It was a modified Model 10 with a 2-inch barrel. Chambered in .38 Special, these and other snubbies graced many a law-enforcement agent’s pocket as a backup to the 4-inch .38, or the 1911, on their hip. The Chief’s Special was a 5-shot revolver, although most of the Colts held six.

Fast-forward several decades. The polymer-framed, 9mm sub-compact has pretty much taken over the backup gun market. But wait… Look over there… a revolver! That cop has an archaic wheelgun in his pocket holster! Revolvers aren’t dead, Herkimer. In fact, I would say that their popularity continues to grow, and their presence is felt everywhere. 

For me, an admitted dinosaur where guns are concerned, they never went away. I have owned, or do own, many revolvers in calibers ranging from .22 to .44 Magnum. I’ve taken small game, and I don’t know how many deer with them over the years. 

In terms of snubbies, I’ve owned a few, including the aluminum-framed Colt Cobra (the one with the cool-looking shrouded barrel and full wooden grips that I wish I had back), a short-barreled Model 15, a Model 643, a Rock Island Armory M200, and now this Diamondback SDR (Self-Defense Revolver). I have an unlikely statement to make… the SDR is by far my favorite of the bunch. 

Why?

There are a few reasons…

  1. It’s a 6-shot, not a 5-shot. ‘Nuff said. Another feature is the counterbored chambers.
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver
  1. The cylinder comes off the frame with the push of a button.
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver
  1. The DA trigger is probably the best DA trigger of any snubby I’ve owned; I don’t say that lightly. It is light – right at 10 pounds – and it’s smooth, with zero stacking.
  2. The sights are wonderful. Red and green, fiber optic. They can be swapped if needed.
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver

That’s a great sight picture!

  1. The gun fits J-frame holsters. Here’s one from Hidden Hybrid Holsters. (I know, some of the trigger is showing… I just didn’t shove it in all the way. It covers it just fine.)
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver
  1. It takes J-frame aftermarket grips. One will be added later this week that will let me get three fingers on it, not just two.
  2. The cylinder release presses in, like a Ruger. Not to the front (S&W), or rear (Colt).
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver
  1. The finish is wonderful. Bead-blasted stainless steel will allow any marks to be polished out without messing things up. 
  2. The muzzle sports a 45-degree target crown.
Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver
  1. The fluted cylinder reduces a bit of weight.

There you go. The gun is a bargain at a street price of around $650 (matte black is a bit cheaper, and the “shiny” polished stainless is a bit more). Considering it’s chambered in .357 Magnum, you can get a lot of mileage out of it by shooting .38 Specials… this isn’t rocket science or earth-shaking, but it’s like getting two guns in one. (I asked my D-back guy about the possibility of adding a 9mm cylinder to this gun, as they make it in that caliber. He said it would have to be factory-fitted, which makes sense, to space the cylinder gap just right.)

Specifications

  • Caliber: .357 Magnum /.38 Special +P
  • Length: 6.53 in
  • Width: 1.38 in
  • Height: 4.44 in
  • Weight: 21.20 oz
  • Frame Material: Forged Stainless Steel
  • Frame Finish: Glass Bead Stainless Steel
  • Barrel Length: 2.00 in
  • Barrel Material: Stainless Steel
  • Barrel Finish: Glass Bead Stainless Steel
  • Grooves: 6
  • Capacity: 6 Rounds
  • Cylinder Material: Stainless Steel
  • Action: DA/SA
  • Trigger Pull: 9-11.5 lbs Non-Stacking
  • Front Sight: Fixed Fiber Optic – Orange
  • Rear Sight: Low Profile Dovetail Fiber Optic – Green
  • Grip: Hogue Black Rubber W/ Diamondback Logo
  • MSRP: $777
  • Warranty: Limited Lifetime

Range Time

Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver

I gathered up a bit of .38 and .357 ammo, some targets, and hearing protection, and headed to my backyard range. I set up the targets at a distance of 10 yards and shot over a Birchwood Casey shooting bag.

Here is the target stand I used…

Diamondback-SDR-target-stand

This is the Ultra Portable Target Stand from Caldwell. It even comes with targets for $17.

Here are a few representative targets.

MagTech .38 Spl. 158-grain LRN… four in, one out. It shot low.

Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver

Armscor 158-grain JHP .357 load. Fairly close to P.O.A., a bit right.

Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver

A “just-for-fun”, different-brands-of-.38 Spl. conglomeration. These targets show that my eyes, coupled with these sights, place shots to the right, but not too far away from the center. The gun did its job.

My engineer son wanted to see the inside, how it was put together, so we removed the grip – effort was required there – and removed the Torx screws. There were a lot of MIM parts, but they were finished and fitted very well. The proof is in the trigger pull, and this one’s is outstanding.

Diamondback SDR Review: Best 6-Shot Snub-Nose Revolver

Here we see the gun wearing a different set of J-frame Hogue Tamer grips that don’t fit exactly at the top, but I want to try them. If they work and don’t slip, I’ll leave them on and not worry about the little bit sticking out at the top, or I’ll trim them… no big deal. That won’t affect concealment, plus the grip allows all three fingers to be used. The holster is a rough-side-out OWB model from Relentless Tactical… nice stuff. 

Conclusion

Released at the 2024 SHOT Show, the SDR has been a runaway hit for Diamondback. The Florida gunmaker is known for its AR-platform rifles and a line of inexpensive 9mm pistols. This wheelgun was a departure for them, but it paid off. With seven models available – .38/.357 guns with 2- or 3-inch barrels in three finishes and one in 9mm, ranging in price from $777 to $870 – you have a choice. Speaking of 9mm, I wonder why they don’t just include a 9mm cylinder with the .38/.357 models. They could bump the price a bit, but THREE guns in one is quite an incentive to buy. Taurus makes one that sells very well. With the push-button release that allows the cylinder to be removed, it only makes sense.

This gun is well thought out and executed in a top-notch fashion. The DA trigger on mine alone is worth the price of admission… smooth, light, even, with no stacking. 

That bottom target above is proof that I enjoyed shooting this gun, even with the .357 loads. It handled very well… I didn’t want to put it down. Trust me, that’s the FIRST time that’s ever happened to me with a short-barreled .357! It was comfortable to shoot.

If you’re in the market for a snubby, give this little guy from Florida a look… You might be glad you did!

Where To Buy

Diamondback SDR

Tags Gun Review
Photo of author

Mike Hardesty

Mike has been shooting, reloading, and casting bullets since the late 1970s. Father of four sons and grandfather of 12, he stays busy at his backyard range and reloading bench, shooting and crafting loads. A retired music teacher and current adult ed instructor, he stays busy and loves the challenge that writing provides.

22 thoughts on “Diamondback SDR Review | The 6-Shot Snub-Nose Done Right”

  1. I’m a sucker for snubbies and weird pseudo futuristic sci-fi styling. On my buy list. Curious how it compares to the SP101.

    Reply
  2. I like snubbies too. I carried a 442 as backup to my duty weapon for 25 years. I carried it today. When my daughter got her first apartment (second floor, more difficult to break into, I insisted) I gave her a Detective Special. She shoots it well. I have another perfect Detective Special in a safe somewhere. I just enjoy knowing I own it.

    Reply
  3. I suppose they’ve done their research but those cylinder walls look mighty thin for the length of the cylinder to me.
    Also the cylinder spins towards the crane. That used to be a thing.
    Reply posted by Xdduly Elected Official using the presupplied email address.
    (how much of this will it take before its fixed?)

    Reply
  4. Oh my. (drooling) That looks like the perfect concealed carry revolver.

    I would probably go out and buy one if I did not already have a similar revolver (although not as good) from a competitor.

    The article also mentioned that Diamondback offers this revolver with a 3-inch barrel. That really piqued my interest as well.

    Reply
  5. I’ve owned the same bead-blast finished model since last October. It replaced my beloved SP101. The SDR is simply a superior execution of the self defense .357 revolver. I enjoy the trigger, sights, and overall ergonomics of the SDR so much more than anything else in its class.

    Reply
  6. TTaG,

    Please fix your site. The incessant behavior of automatically hiding almost every comment is not sustainable.

    Reply
    • So far my email has not been posted that I can see but if I was one of the 10 or so email owners that have had I’d be a little miffed.
      I’ve noticed the Delayed Blowback Action on comments seems to only happen when I use my email which does not have the save my email checked. When I use the presupplied emails they pop up immediately.

      Reply
    • Understandable if people didn’t figure out in the 90’s everything on the internet was traceable and vulnerable and didn’t use names or numbers that tracked back to them. Then again I am the paranoid sort.

      Reply
  7. The Chief Special was not a modified model 10.

    It was a modified Terrier. The Terrier was the 38/32 model chambered in 38 S&W. These were I-frame guns.

    The cylinder was lengthened to allow the 38 special cartridge.

    As time progressed – the I frame became the j ftame in all small revolvers.

    The model 10 (M&P hand ejector) was a k framed gun with a 6 shot cylinder. Considerably larger and heavier than a Chief Special.

    Reply
  8. Do you have a Kimber K6s? Be curious to know how it stacked up against it? I’ve carried mine for years but always interested in an upgrade.

    Reply
  9. I am worried about the safety of shooting the revolver used for this review after seeing the gouge on the rear cylinder face/chamber counterbore in the photos. There also appears to be another smaller gouge in the counterbore of the chamber that is above the cylinder release in the photo that is showing the sight picture.

    I looked at photos of other SDRs from different reviews online and didn’t see any gouges on those revolvers. That gouge could be a metal defect or damage that happened possibly during machining. Either way, there is stress concentrations in the steel where the gouge is and a crack could form. The crack might not be visible and could result in a catastrophic failure when firing a round from that chamber.

    I would contact Diamondback and see if they would replace the cylinder.

    Reply

Leave a Comment