Fix It Sticks New Pistol Armorer’s Kit is the Ultimate Portable Pistol Tool Kit

We’ve used Fix It Sticks tools for years. They’re compact, handy, high quality tools that help you work on and dial in the proper torque when you’re mounting a scope, installing a new quad rail, or doing virtually any other job you want to get done when working on your guns.

Now Fix It Sticks has announced their new Pistol Armorer’s Kit. It’s a huge array of must-have tools for working on virtually every pistol in your safe.

Fix It Sticks, the industry innovator of modular firearms maintenance tools and torque limiters has introduced a new field-portable, yet comprehensive tool kit, The Pistol Armorer’s Toolkit. Developed with input from gunsmiths, competitive shooters and optics manufacturers, The Pistol Armorer’s Toolkit has an extensive array of the most useful tools, bits and a torque driver necessary to properly setup, maintain and accessorize a wide variety of handguns. The kit is capable enough to use on the bench, but portable enough to easily take to the range, out in the field, keep in a vehicle or ATV, etc.

The Pistol Armorer’s Toolkit has handgun specific tools and components such as a Magazine Base Plate Removable Tool for Glock, Sight tool for Glock, Channel Remover for Glock, Channel Installer for Glock, and a 1911 Bushing Wrench. Other premium components include an the commonly needed hex bits and punches, an Aimpoint® Bit, a brass hammerhead, an armorer’s block, a magnetic tray to prevent losing small parts and a take-down brass cleaning rod.

A Fix It Sticks Ratchet T-Handle w/Locking Hex Drive and a Mini-All-In-One Torque limiter are also included. The Ratchet T-Handle w/Locking Hex Drive works with any quarter inch hex bit, but also allows the use of tools that require a pulling motion such as the cleaning rods and Channel Remover for Glock. The Mini-All-In-One Torque Driver is perfect for properly mounting optics, lasers, lights, etc. The Pistol Armorer’s Toolkit includes the following comprehensive tool selection:

• • • Ratchet T-Handle w/Locking Hex Drive
    • Mini All-In-One Torque Driver
    • Extension/punch holder
    • Brass Hammer Head
    • Soft Carrying Case standard
    • 1/4” base (including Fix It Sticks Torque Limiters),
      and any 8-32 threaded component
    • Aimpoint Bit
    • Battery Cap Tool
    • Pin Punch set (1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”)
    • Brass Pin Punch Set (1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”)
    • 8-32 adapter
    • Magnetic Tray
    • Bench Block
    • Set of Four Brass Cleaning Rods (accepts 8-32 threaded attachments)
    • Steel Pick
    • Cleaning Brush
    • Magazine Base Plate Removable Tool for Glock
    • Sight tool for Glock
    • Channel Remover for Glock
    • Channel Installer for Glock
    • Grip Screw Bit
    • Spring Tool
    • Slide Tool
    • 8-32 adapter
    • 1911 Bushing Wrench
    • T-Pins
    • Twenty-One 1/4” Bits (1” in length):
      • Torx:
        T6, T8, T10, T15, T20, T25
        Metric Hex:
        1.5mm, 2mm, 2.5mm, 3mm, 4mm
        SAE Hex:
        .050”, 1/16”, 5/64”, 3/32”, 1/8”, 5/32”
        Phillips: P0, P1
        Slotted: 3/32”, 3/16”
    • Two 1/4” Bits (2” in Length):
      • Torx: T10
        Slotted: 3/32”

The soft carrying case features molded-in bit holders designed to hold any bit / accessory with a standard 1/4″ Base (including Fix It Sticks Torque Limiters), and any 8-32 threaded component.

The Pistol Armorer’s Toolkit is now available with an MSRP of $340.00.