I fully admit that I’ve been sitting on some gear from Rock Solid Industries for damn near a year, which is way longer than intended. I’ve got most of it mounted, but my wartime production Mosin Nagant makes fitting semi-standardized parts a bit of an issue. While I’ve been fighting my rifle, TC Tumlinson of Country Steele has been developing some new gear for the old platform which is now available. First on the block is a left handed bolt that doesn’t require any destructive modifications to the rifle . . .
The bolt handle is slightly massive, but it works. The only detail is that instead of slapping the bolt up, you slap this one down and pull back to cycle the action. The guys say that the impetus for the design was that the owner of the shop is left handed, and working a right handed Mosin bolt is a pain in the ass.
Also a pain in the ass: stripper clips. I’ve had the pleasure of shredding my thumb trying to use these in a hurry before, and it isn’t pretty. RSI’s solution is a computer machined stripper clip with a polymer follower that takes loading a rifle from about 30 seconds of cursing to one two-second grunt. I’m not 100% sure on how many of these they will sell, but it’s definitely an improvement over the old design.
[UPDATE] RSI has posted a blog post with more information and answers many of the questions below.
Another DDoS?
Me too. Continuous 502 Errors for last two hours, until just a few minutes ago. Working good on other sites, and Fakebook version of TTAG was up…so my guess is WordPress, again?
Seeing that bolt (and imagining it in use) makes me think right handed bolts should be designed this way: never have to worry about smacking your optic with the back of your hand accidentally with that.
The stripper clip thing has me much less convinced.
Or, more companies should make straight pull rifles.
Want both of these things. Also I now need to buy a Mosin.
+1
my southpaw wife just saw this and said “ok now we can buy a Mosin.” (her only rule-I can’t buy guns she can’t use.) 😀
Smart wife.
Any idea as to what the going rate will be for one of those beautiful bolts? my mosin has been gathering dust due to my tendency to leave skin on the bolt when working it. And when will they be available. Inquiring minds want to know!
It’ll be more the you paid for the rifle.
Considering the rifle is under a hundred bucks, that’s not saying a lot.
Haven’t priced a 91/30 lately, have you?
Just like Mausers, the only Mosins you’re getting for a buck a piece are very common, and nobody cares about them except as shooters. Which is fine, but it’s not the rest of the market. There’s a whole bunch of Mosins you would be hard pressed to find for $500+. If you can even find them.
Why not buy a left hand bolted Mosin Nagant.
My intent wouldn’t necessarily be to worry about cost as much as to make the gun more shootable FOR ME, and the make it mine, My Own, Myyy PPRRRREEEEECIOUS!!! 🙂
Now I know what happened to that bong bowl I lost last year…
The new stripper clips are an improvement that won’t fit in a standard stripper pouch.
Bet the stripper clips are tough to use on the rifle pictured……..
Why is there a harmonica and the mouthpiece of a brass horn mounted on that rifle?
Sow’s ear-silk purse. My mosin is a cheap, clunky antique that’s more fun than a bag of puppies. Why would I want to ruin that by making it more modern?
And it looks like my comment is going to be credited to uncommon sense.
This is JWM.
Everyone is entitled to their opinion, and I respect yours.
There’s plenty of other Mosins that are neither clunky nor cheap. Antique though they may be.
Just sayin’…
Why not buy a left hand bolted Mosin Nagant. I agree, I have 10 of them wouldn’t sell any one of them for less than $500.00.
I have a CBRPS bullpup stock on my Mosin. I was looking at how I could left-hand the bolt. I’d be interested in this… if it doesn’t triple the “value” of my gun again!
Comrade, the secret of Mosin is do not buy crap for Mosin! Buy booolits! Rest is for borscht and wodka!
But seriously, how do you open a spam can without bleeding out if you can’t even use the standard stripper clips without injury?
I guess if you’re a southpaw, this bolt would be a welcome option. Does it come in any colors/styles that look like it might belong on a rifle, or is “Trashy Pimp” the only option?
I imagine the bling is to draw eyes to the booth. At the very least basic black will be an option and likely any color you might want may be available on request.
What a horrible idea! New accessories for a 100+ year old rifle!
Hello,
I’m not seeing the stripper clip on RSI’s website..? It looks like a decent improvement that would serve some folks, depending on price.
I’ll stick with the ejector improvements and load mine like Mausers 🙂
Not sure I understand the need for the lefty bolt handle. I work mine by reaching over the top (I’m a lefty). I guess it might serve some folks well, though.
Regards,
Josh
Are we just going to ignore that beautiful stock?!
Well I noticed that stock. Any details?
The stocks are designed and manufactured by my father, he has a website for his stocks: http://www.bg-gunstocks.com
When will I be able to purchase one of these bolts.
Good one! I am sure this will help.