Previous Post
Next Post

 [HTML1]

I received the following email blast this afternoon from Constitution Arms. The aspiring manufacturer of the Palm Pistol—a one-shot firearm for people unable or unwilling to pull a trigger—is nothing if not persistent. I’d like to see a working prototype of Mr. Carmel’s firearm, but he’s been just as determined not to let the press get ahold of the gun as I am to test it. Anyway, here’s the latest . . .

Dear Potential Palm Pistol(r) Customer:

This update concerns both the Palm Pistol(r) and Tri-Cor(tm) ammunition . . .

PALM PISTOL

As reported in our last update, the physical design and safety testing of the first working prototype was completed. A finacial [sic] review by our accounting professionals recommended that we reduce our initial production run from 1000 to 500 units. This will have a positive effect on projected cash flow and allow for a more orderly introduction of the product.

After considering several production options such as licensing, equity investors and others, we decided to approach the three primary manufacturing specialties to form a consortium to bring the Palm Pistol(r) to market.

The proposed consortium agreement provides that the three key suppliers contribute the materials, workmanship and parts necessary for an intial [sic] production run of 500 Palm Pistol’s(r) in exchange for a phased payment of the value contributed plus interest on that value, secured by collateral. The agreement is currently under discussion and the details are being negotiated.

Concurrently, we have submitted the full working prototype to ATF for additional review concerning the classification of the “as cast” receiver as a non-firearm. If ATF rules as we expect, it will allow the raw investment casting to be produced by a non-licensed manufacturer. The finish machining however will have to be performed by an ATF 07 licensee. A response from ATF is expected within a month or two.

We have received many inquiries concerning the projected retail cost of the finished product. In 2008, based purely on good faith estimates and some guesswork, we projected a retail cost of approximately $300. It is now clear this was overly optimistic. While we still are not in a position to determine the final retail price, since all our costs are not yet finalized, we now estimate the cost will be above $600 retail.

We currently have pre-production deposits of $25 for each of 313 units. If any customer who has submitted a deposit is unwilling to pay this estimated cost, please let us know immediately and your deposit will be promptly refunded. Conversely, if anyone who has not submitted a deposit and would like to reserve one or more of the remaining 187 units, kindly submit a check for $25 per unit reserved, made payable to Constitution Arms.

Mailing address is 12 Hoffman Street, Maplewood, NJ 07040. These will be reserved on a first come first served basis. Reservations by phone, email or credit card will not be accepted. If deposits are received for more than the remaining 187 units, customers will have the option of being placed on the list for the second production run or having their deposit returned.

TRI-COR(tm) AMMUNITION

In our last update, we announced the availablity of a multi-projectile .38 special cartridge specifically designed for the Palm Pistol(r), snub nosed revolvers and and Bond Arm(r) handguns.

There was a delay in shipping these due in part to an error by our trademark attorney who failed to identify that the former name Tri-Plex(r) was registered to a Swiss company. This forced us to rename the product to Tri-Cor(tm), preprint the packaging materials and revise the Palm Pistol website. The product is now shipping.

Since this ammunition does not lend itself to automated assembly and the load is extremely sensitive to any variation, it must be hand loaded and as such, availability will be limited.

We commissioned high speed video of the Tri-Cor(tm) being fired at 10 feet from a S&W Model 60 with 2 inch barrel into 10% ballistic gel and clearly supports our findings that it produces a ballistic wound channel up to 49% larger than a comparable hollow point projectile. [ED: As above] The video has sound so be certain to turn on your speakers.

If any customers wish to order Tri-Cor(tm), please fill out the order form on the website. Please note that we are advised by legal counsel that as a New Jersey company, we can only directly ship ammunition to another FFL. We realize this is an inconvenience but prudence dictates this requirement.

Again, our thanks for your patience and we will provide additional updates as appropriate.

Matt Carmel, President

Constitution Arms
[email protected]
www.palmpistol.com
www.constitutionarms.com

Previous Post
Next Post

15 COMMENTS

  1. I would be afraid to get this gun out, what if you have a doubt you put the safety on, or what if the safety comes off when you unholster? You shoot yourself in the leg and the assailant steals your POS gun and wallet.

  2. As I said, in a previous post on this…why?

    Who is the target market? If they are old, and infirm, there is a good chance they live in some sort of assisted living situation. Those places do not allow guns. When we moved my grandmother into one a few years back, she was mad that she couldn’t take her .38. Also, the mental capability of those people could be questioned. Again, my grandmother was starting to show some signs of senilty.

  3. The thing that concerns me about the video is that there is no wide angle shot of the projectile leaving the barrel and separating into 3 separate projectiles. You get 2 slow mo shots, one showing a seemingly solid projectile leaving the revolver, and then another shot that shows three projectiles in flight towards the target, but not how they separate. The rest of the video are digitally enhanced close-ups of these two separate shots slowed, and zoomed in on. My concern is that the maker shot a revolver with a solid projectile, and the created a rig to fire the three “cors” and filmed the damage done. It does not look like the second shot was fired from the revolver presented in the first shot. In other words, I call fake.

  4. I want to reserve the Karl Lippard Palm Pistol. You know, the one that’s accurate out to 500 yards.

    BTW, palm pistols have been around almost since the beginning of handgun history. None of them really worked.

    • Like “Protectors”. If memory serves, there were at least two mods under this name – with rear “trigger” and front one. One of them even been spotted in some earlier Steven Seagal movies (3rd, probably).

LEAVE A REPLY

Please enter your comment!
Please enter your name here