Previous Post
Next Post

Courtesy Joe Grine

M+M Industries hit the scene a few years ago importing M10 (AKM pattern) rifles from the Cujir factory in Romania. Combining a good price point and high quality, the M10 was well received. However, demand outpaced supply, and  M+M decided to manufacture its own rifle.

But rather than just produce a traditional AKM design, M+M upgraded the venerable platform to make it more accurate and to provide a better interface for optics. Thus, the M10x Elite was borne. Is this the most accurate production AK derivative rifle in existence?

Courtesy Joe Grine

One clarification is in order right off the bat: M+M Inc.’s M10x is not a pure AK derivative. Rather, it’s a hybrid design that takes many of the best features of the traditional AK (magazines, magazine release, fire control, pistol grip, etc.) and combines it with a serialized steel upper receiver /“monolithic”  alumimum barrel shroud, a SIG SAUER inspired gas system and action, and an AR-15 inspired safety and stock interface.

In fact, the more time I spend with this rifle, the more I’m inclined to think of it as an attempt to “upgrade” the SIG SG 550 series of rifles by replacing the proprietary aspects of that system (i.e. trigger, magazine, pistol grip, and stock) with readily available AK-47 and AR-15 alternatives. The beauty with that approach is that it makes the rifle easier to customize and upgrade.

Want a different stock or pistol grip? Can do. Easily. Want a high-end aftermarket AK trigger? Ditto. Want to add M-Lok accessories? Yup. Need Picatinny space for night vision to shoot hogs? Yes sir. You can tell that the design concept of the M+M M10x Elite was to make the rifle easy to customize.

Courtesy Joe Grine

The “lower receiver/trigger housing” (for lack of better terms) is pretty standard AK-esque in design. The M10x’s billet steel upper receiver, on the other hand, is unique. That’s the serialized part, but you really can’t see much of the upper receiver because it’s fully encased by a one-piece, 18-inch-long, aluminum extrusion “barrel shroud / dust cover.”  If you take apart the hinge screw, the steel receiver and aluminum shroud can be separated from one another.

In this photo you can see the receiver hiding beneath the aluminum “barrel shroud/dust cover:”

Courtesy Joe Grine

With that out of the way, here are the key features of the M+M M10x Elite:

Fully floated nitrided barrel (result of floated joint at gas cylinder and gas block)
Reversible charging handle
Ambidextrous AR-style safety
Full-length picatinny rail and M-LOK sides and bottom
Proprietary hybrid flash suppressor / muzzle brake
Plunger-style ejector
Three-position adjustable gas valve (including “off” position)
No AKM style recoil spring (Mainspring instead wraps around the gas piston)

Ergonomics/User Interface

I’ve read that AKs are known for having “poor balance,” but with the possible exception of the AKMS underfolder, I’ve never found that to be the case. Perhaps some AKs are a little front heavy, such that holding them by the pistol grip alone is a bit awkward. Nonetheless, while a typical AK weighs in at seven to eight pounds, depending on the version, most feel lighter. In fact, most people think of an AK as a very “handy” and relatively compact rifle.

Courtesy Joe Grine

The photo above shows the M10x Elite below the M10, which is a “standard” AKM in terms of length and weight. The M10x Elite has better balance than most AKs, but it is noticeably heavier at 8.5 lbs. empty. In terms of heft, it reminds me a lot of the IWI Galil or Finnish Valmet. In short, that characteristic AK “portability” or “handiness” factor seems to be missing: it’s somewhat like the difference between an M-16A2 and an M-4. The M10x Elite also feels longer than it really is, but that’s mainly because the buttstock can be extended much further back than a conventional AK.

All of these complaints go away, though, when you shoot the M10x Elite. In fact, the same extra weight and length that make it feel less “handy” help make the M10x Elite a pleasure when it goes bang. The longer stock is also a big plus as well, and maybe the KickLite recoil reducing stock (discussed below) helps a bit as well.

Courtesy Joe Grine

One huge improvement over a standard AK is the ambidextrous AR-style safety lever. It features a 45° throw lever which is much faster to employ than the typical AK lever safety. The M10x Elite also features a Hogue pistol grip, which is much better than the typical commie grip made for under-fed Soviet peasants.

Gas System

Courtesy Joe Grine

The M10x Elite features a three-position adjustable gas valve that appears inspired by the SIG SAUER 550/551 series. Under normal conditions, the gas value should be set to “1.” In harsh conditions or when using poor ammunition, the gas valve can be closed down to the “2” position, which directs more gas into the action.

Finally, if you wish to manually cycle the rifle, you can set it to the “0” position. In this mode, most of the gas escapes out the sides of the gas cylinder, causing the rifle to not cycle. In the photo below, one can see the holes that regulate the amount of gas that reaches the long stroke gas piston.

Courtesy Joe Grine

This photo shows the bolt, the charging handle, the bolt carrier, the gas tube, and the piston and captured main string assembly.

Courtesy Joe Grine

Bolt Carrier Group

Courtesy Joe Grine

You will understand that this is not your typical AK when you look at the bolt. While obviously inspired by the Kalashnikov design, subtle differences exist. In fact, the M10x traces its bolt design more directly from the SIG 540 series of rifles. That isn’t a bad thing, because the SIG 540 is a proven design going back 45+ years.

The rotary bolt locking mechanism consists of two steel locking lugs that engage locking recesses in the breech and, with one exception, is identical to that used in the SIG 540/550/551. Like an AK and the SIG, a spring-loaded extractor is incorporated into the bolt. However, the M+M features a plunger-style ejector. (If I’m not mistaken, this latter feature is different than the SIG, which as far as I know features a fixed protrusion on one of the receiver’s internal guide rails which ejects the spent cartridge casings).

Courtesy Joe Grine

Aside from these SIG-esque modifications, there’s also a high level of machining that’s atypical for an AKM or AK clone. In the photo above, compare the work on a garden variety AKM (top) and the M10x Elite (bottom).

You can see the difference between a typical AK (right) and the M10x (left) below. Note the plunger ejector, which provides constant spring pressure on the round:

Courtesy Joe Grine

Another view (M10x at top).

Courtesy Joe Grine

Barrel

The M10x features a high quality US-made 16.25-inch barrel made of 4140 steel and finished in black nitride. It has a 1 in 9.25 twist, and is threaded to accept brakes with 14/1 left hand threads typical of AKs. I’ve been told that in the future, M+M is responding to user feedback by switching to a more common 5/8 x 24 thread pattern to make it easier to use with suppressors and U.S. made .30 cal. muzzle brakes. The best feature of the barrel is the fact that the breech end is threaded (as opposed to being press fit and pinned like a typical AK), thereby making barrel changes easier for a gunsmith.

Trigger Group

Courtesy Joe Grine

Courtesy Joe Grine

The M10x Elite’s trigger group is a definite high point, breaking at just over four pounds in my tests. It’s a single hook design made in house at M+M. It appears to be a MIM part similar to the Tapco G2. The trigger is typical of AKs and MP-5s in the sense that it features a long steady pull with no discernable “wall.” The long pull has obvious creep only if you try to slowly “stack” the trigger; otherwise it is pretty smooth. While not a target trigger, it’s one of the lightest and best factory AK triggers I have ever shot.

Iron Sights

Courtesy Joe Grine

Courtesy Joe Grine 

The MOE aluminum back-up iron sights (BUIS) are a definite low point. So much so that M+M has since made the decision to ditch them and ship the rifle without any sights. As far as I can tell, these sights appear visually similar to the Yankee Hill Machine Co. 5040 Q.D.S. sights, but they aren’t the real deal. Instead, they’re Chinese reproduction. In fact, they are the only part of the rifle not made in the USA.

While I guess they work to some extent, they seem second rate compared to everything else about this otherwise first-class rifle. It’s like putting steel wheels and hubcaps on a Porsche. In addition to an overall chintzy and clunky feel, the front sight post is canted and the rear sight wouldn’t remain retracted under recoil.

Courtesy Joe Grine

The rear sight I got was also cosmetically blemished, as you can see in the top photo above. So if you end up buying an M10x Elite, chuck the factory BUIS and get a set of Fab Defense FBS/RBS, Magpul Pros, or, if you’re feeling flush, the excellent Knight ‘s Armament BUIS.

 Magazine Release

Courtesy Joe Grine

M+M might have bombed out with the iron sights, but their excellent proprietary “MRL” magazine release is the bomb. It’s innovative because it uses optimized geometry to improve on the original Kalashnikov design. The M+M MRL helps eliminate magazine wobble and increases the number of out-of-spec commie magazines that will function with the rifle. I added one to my AMD-65, and it really improved that rifle by eliminating the wobble.

 Phoenix Technologies Kick-lite Buttstock Shaft

Courtesy Joe Grine

One unique feature on the M10x Elite is the Phoenix Technologies Kick-Lite recoil reducing stock buffer. Recoil reduction stocks make some sense on a 12-gauge shotgun, but I’m still unconvinced of the need on a platform that shoots 7.62×39.  While the system seems to work to a degree, it adds unnecessary weight and cost.

Also, when shooting from the bench, the Kick-Lite causes the gun to tend to bump-fire a second round. In fact, when shooting off of front and rear bags, I had to make a concerted effort to prevent the rifle from sending two rounds down-range. I let a few friends shoot the rifle and they experienced similar bump-fires. I have the feeling that M+M may ditch the Kick-Lite in future production of this rifle, as they did with their “Zhukov” version of the M10x.

Muzzle Brake

Courtesy Joe Grine

M10x rifle comes standard with M+M’s CHAOS hybrid muzzle brake and flash hider. This is the same brake that was used in the original M10, and is a refinement of the Tapco Razr brake. I have no complaints about the CHAOS brake; in fact, on the M10x Elite, I did not hear any of the resonating “twang” sound I heard when the CHAOS brake was fitted on the original skinny-barreled M10. The M10x Elite featured an AK-compatible 14x1LH thread pitch. Again, feedback from consumers has convinced M+M to use the more standard 5/8x24RH barrel threading in future production runs.

 Bottom Picatinny Rail

Courtesy Joe Grine 

The M10x Elite features a short 1913 picatinny section milled directly into the bottom of the “upper” receiver. I don’t think this rail section is particularly necessary, but it may work with a short vertical foregrip such as the BCM Gunfighter. I tried to mount a Magpul RVG grip but it wouldn’t fit due to the clearance needed for the 30-round magazine. This bottom rail feature is dropped on the Zhukov model in order to shave off some weight and cost, and frankly, won’t be missed.

Disassembly

Courtesy Joe Grine

The M10x Elite is easy to disassemble, although I did have to resort to the unmanly act of reading the manual to figure out the first step. Turns out there is a latch located on the underside of the lower receiver that you can push forward (i.e. towards the muzzle end of the rifle) to “open” the rifle. In this regard, the way the upper and lower receivers pivot on a hinge pin reminds me of my FN FALs.

Once open, you un-pin the charging handle using a bullet or similar pointed object, and then the bolt carrier group will slide out the back of the upper receiver. The gas system is similar in appearance and function to a SIG 551 and a FN 49/FAL. It consists of a gas cylinder, a gas valve, and a piston with captured spring. It’s easily removable using a bullet or similar object.

Once field stripped, the M10x Elite is easy to clean – similar, if not easier, than an AK. The only tough part is cleaning the outside of the barrel, since it is covered by the handguard and not readily accessible. To clean the barrel, you do need to unscrew the hinge screw, thereby allowing the barrel shroud to be removed from the upper receiver.  This requires removal of any M-Lok accessories that are attached to the handguard.

Accuracy

Courtesy Joe Grine

Holy cow. If you need a reason to buy this rifle, this is it. The free-floated barrel, monolithic upper receiver and excellent trigger pay great dividends in the accuracy department. While most AKs seem to shoot in the 2-4 MOA range, the M10X Elite is easily a 1 MOA rifle, especially when using US-made brass case ammo such as American Eagle or Winchester PDX defender, or the steel cased Hornady SST.

While a typical AK has a shorter stock and handguards that make shooting off a bench somewhat awkward, the longer stock on the M10x Elite helped me get some good supported shooting positions. For example, using “Dog Gone Good” front and rear bags, I even shot this impressive three-shot sub ¼-inch (1/2 MOA) group at 50 yards:

Courtesy Joe Grine

Brass-cased Sellier & Bellot and Prvi Partisan also shot very well, repeatedly turning in groups in the 1.0 to 2.0 MOA range at 50 and 100 yards. Even the lowly Russian steel-cased ammo (Wolf, Tulammo, Red Army, etc.) shot 1.2-2.5 MOA for the most part, but the steel-cased ammo exhibited a higher tendency for annoying flyers. A “typical” 100-yard group with Ruskie steel-cased ammo looked like this:

Courtesy Joe Grine

That’s four shots at roughly 1.5 inches, and a “flyer” that opens the group up to 2 MOA.

Moving out to 300 yards, hits were easy to obtain on a 12 x 20 (2/3) IPSC target from Grizzly Targets. Using Hornady 123-grain A-Max SST and a Leupold 2-7 VX-R scope, I was able to turn in this 3-shot group that measured just a hair over 3 inches.

Courtesy Joe Grine

When shooting at the Grizzly 2/3 IPSC, we were able to get reliable hits at 400 yards and occasional hits at 500 yards. In both instances I was obviously dialing significant elevation to compensate for bullet drop. However, things really did fall apart for us when we tried to engage similar sized targets at 600 yards.

I attempted to reach out and touch an 18-inch gong at 600 yards with no less than 60 rounds of high-quality U.S. made ammo, with almost no success. We concluded that the fat and somewhat slow 123-grain bullets just get bucked around in the wind too much to give reliable accuracy at that distance. Even with that, the M10x impressed. I’ve always thought of the AKM platform as having a maximum effective range of 200-yards +/-, but this rifle easily doubles that effective range to 400-450 yards.

Reliability

Courtesy Joe Grine

When you’re dropping somewhere in the neighborhood of $1,300 to $1,500 on a rifle, it had damn well better perform flawlessly. Fortunately, the M10x Elite did not disappoint. It delivered excellent reliability using a variety of different ammunition. In fact, we ran at least ten different brands of ammo through the rifle, and it gobbled up everything we threw at it. We even did a few obligatory “mag dumps” in order to make sure the gun would run hot, and the M10x Elite did not miss a beat.

Conclusion

Courtesy Joe Grine

While technically not an “AK,” the M+M M10x Elite will hold significant appeal for AK aficionados as well as those seeking a modern updated SHTF platform supporting the ubiquitous Soviet M43 (7.62 x 39) round. As updated, the M10x Elite extends the maximum effective range of a typical AKM from 200-250 yards to 400-500 yards. In so doing, the M10x loses some of the lightweight portability that AKMs (and, in particular, the folding stock AKMS variants) are so famous for.

Nonetheless, depending on your purposes, this may be a fair tradeoff for the increased accuracy/range. In fact, it’s fair to say that this is the finest “AK” compared to my collection, and I prefer it to an Arsenal SAM7SF due to its superior accuracy and ability to support optics. Having said that, I don’t own a Krebs or a Rifle Dynamics, so I can’t compare this to those high-end offerings.

Now let’s talk about the price. The M10x Elite’s $1,550 MSRP ($ 1,300 – 1,500 street) is a lot of dough for a modern sporting rifle that shoots an intermediate cartridge such as the 7.62×39. I would be a lot more comfortable recommending it at a street price in the $1,200 range so that it’s less expensive than the SIG SAUER 556xi and the AR-inspired CMMG Mutant.

I have not done a comprehensive review the SIG SAUER 556xi, for example, but I have fired it at SHOT Show. Nonetheless, based on Nick Leghorn’s review, it appears that the M10x Elite kicks the SIG’s butt in term of accuracy. Based on my experience at SHOT, I can confirm that the SIG’s trigger is fairly awful, whereas the M10x has the best factory AK trigger I’ve experienced.

The M10x’s use of M-LOK rail system is also a big plus over the the SIG, but the SIG has highly desirable folding stock and is a full pound lighter.  Despite the fact that SIG SAUER brand has more name-recognition and panache, I also think the M+M is the better buy over the 556xi due to the fact that it is more accurate and more customizable, while still maintaining the high degree of quality you would expect from any high-end manufacturer.

As it turns out, M+M has incorporated user feedback into a new version of the M10x featuring the Magpul Zhukov folding stock. This version makes some other minor tweaks to get the weight down to around seven pounds. Remarkably, they even managed to shave a couple hundred bucks off the price as compared to the Elite.

At the time of this writing, M+M is beginning to release the “Zhukov” version of the M10x, and as much as I like the M10x Elite, I think the Zhukov version is the way to go unless you really like that extra “Galil-esque” heft and a non-folding stock. M+M, Inc. will continue to produce the M10X Elite in a very limited production run once a year.  Individuals wishing to order should contact the company for details on how to get on the list.

Additionally, their new M10X that comes with a Magpul Zhukov folding stock is designed based on the experience with the M10X Elite. The parts are cross compatible between the two rifles. You can see details for both rifles at mm-industries.com. I will be doing a review on the new M10X later this fall.

Courtesy Joe Grine

Specifications: M10X™Elite

Action: Semi-automatic rotating bolt long stroke gas piston driven system
Caliber: 7.62×39
Upper Receiver: Single unit integrated made out of fully heat-treated high quality milled billet nitrided carbon steel
Bolt & Carrier Material: Fully heat-treated high quality milled billet nitrided carbon steel
Lower receiver: Made of stainless steel with Black nitride finish
Upper Picatinny Rail Length: 18 inches
Forearm Cover & Finish: Aircraft grade aluminum; Mil Spec Type III black anodized coating; Magpul® M-Lok compatible slots
Barrel Length: 16.5 inches
Stock Length Collapsed: 36 4/16 inches
Stock Length Fully Extended: 40 1/16 inches
Rifle Weight: 8.5 lbs (tested) without magazine
Trigger Pull: 4.2 lbs +/- (4.1 lbs, as tested).
Safety: Ambidextrous w/indicator marking on both sides of receiver
Charging Handle: Ambidextrous removable reciprocating handle
Stock: Six position Magpul® CTR™ buttstock w/Phoenix Technology® Kicklite recoil reducing shaft
Pistol Grip: Ergonomic rubber overmolded Hogue grip
Magazine Type: Comes with 5/10/30 round depending on state configuration
High Corrosion Resistant Components: Ninety-five percent of the rifle including bolt, bolt carrier, gas cylinder, lower receiver, trigger, trigger guard, upper receiver, mounting hardware are finished in black nitride.
MSRP: $1550

RATINGS (out of five stars):

Ergonomics (Shooting) * * * *
Better than an AK.

Ergonomics (Carrying) * * *
This rifle is a bit heavier than I would prefer – the Zhukov model solves this complaint.  Even so, its well balanced when carried at the ready position.

Reliability * * * * *
No problems so longs as you set the gas ports correctly.

Customize This  * * * * *
This may be the biggest selling point for the M10x – you can swap out the trigger, pistol grip, stocks, and you have plenty of rail space to add anything you can possibly think of.

Accuracy * * * * *
Outstanding. Takes the AK to the next level.

Overall  * * * *
As much as I like the M+M M10x Elite, I think I will prefer the Zhukov stocked model simply because of the lighter weight. Nonetheless, this would make a fine hog rifle, especially when paired with Winchester PDX-1 or similar performance 7.72 x 39 ammo.

Previous Post
Next Post

40 COMMENTS

  1. Yeah, it’s a SIG556R clone with better furniture and trigger system. I didn’t realize that they lifted the recoil spring and bolt carrier more or less wholesale from the platform.

    • Painfully ugly, and the word “Elite” in the model name. -1 star.

      I will agree with you that it is interesting.

  2. Interesting, but it looks like a short stroke not a long stroke. I may have missed something though. They need to get the weight down to 7.5lbs.

    • Ya know, I had to scratch my head on that, but after consulting the books I concluded that it is in fact a long stroke piston system, despite the fact that it comes apart. This is because the piston remains physically attached to the bolt carrier during the full movement of firing sequence / bolt operation. A short stroke uses a tappet rod that makes an momentary impact with the bolt carrier but otherwise does not ride back and forth with that carrier.

  3. I would like to say that I appreciate that you guys have picked up the frequency of the reviews. This is a gun that I will keep my eye on. When I decide to upgrade from my WASR this might be the ticket. That being said. That damn WASR runs like a sewing machine and I don’t know if I will ever upgrade it to begin with.

  4. I don’t understand why you said the sam7sf doesn’t support optics. They have a scope rail. Funny you talk about it in your review as I own one also. I can’t say I would prefer the sam7sf over the m&m cause I haven’t shot a m&m. I do prefer 7.62×39

    • When I wrote that, I was really thinking about night vision, so I could have been more clear. Nonetheless, I will say that I’ve always considered the side rail concept as a half-assed solution to the AK optics-compatibility conundrum. I’ve used them but they are really only good with red dots and small compacts. They just have too much flex to be useful with magnified optics, IMHO. The full picatinny on the M+M M10x is a major leap forward.

  5. If I was interested in another MSR, I would check out this one because of this review. It was loaded with information and details while remaining eminently readable — in other words, it’s another damn fine example of Joe Grine’s work.

    Alas, I’m focusing on old Winchesters now — the Modern Sporting Rifles of the 19th and early 20th Centuries.

    • I’ve contemplated getting into that collector market on occasion, but given that the difference in price between an NRA 20% rifle and an NRA 30% rifle can be thousands of dollars, its rather intimidating to pull the trigger on a purchase.

  6. If it were a .308 I’d get one. I have a Sig MCX that can shoot 3 cals including 7.62 x 39 pretty accurately. Still though, this AK is well built and reliable too. Good write up!

  7. It’s a really cool gun but I think the price kills it. More than a 556xi and basically the same price as a galil ace? Pass. If they can get the price around a grand I think they’ll have a real winner on their hands.

  8. I’m waiting on the new M10X Elite that’s been on pre-order. I’ve been in this business a long time, and believe I know American tastes and desires and will say that M+M has a winner with their new M10X Elite. Great trigger, great accuracy and engineering, looks awesome, and it’s a minimized parts version of an AK. Screw the AK, I say. Get yourselves a highly reliable 7.62×39 and shoot cheap or expensive ammo and have yourselves a rifle that Kalashnikov would have been proud to developed. But didn’t. It was Mike M. @ M+M!!

    • The Zhukov version is apparently more than a pound lighter – looking forward to getting a T&E sample to review. Frankly, the weight of the M10x Elite is not that bad – after all, an Uzi weighs almost 8 pounds and a typical Garand is 10+. Its just that if you are thinking of this thing as an AK derivative, its noticeably heavier than a typical AK. As I said in the review, it reminds me of a Galil in terms of the weight / feel.

  9. >> Hogue pistol grip, which is much better than the typical commie grip made for under-fed Soviet peasants.

    Can you please lay this BS myth to rest already? No, the AK is not “made for under-fed Soviet peasants”. The reason for the skinny pistol grip is because it’s intended to be used with heavy duty mittens in winter. The short stock is there for the same reason – try putting on enough layers to feel warm at -20 degrees Fahrenheit, and see how well you can shoulder that AR with an A2 stock.

    • Lol. Yeah, you aren’t the first guy to say that. In fact, when I wrote it I thought “some dude is gonna comment on this.” And you may be right, but its still fun to make jokes / quips about the commie Russians every once in a while. Some of the youngsters forget what a bunch of assholes they were back in the day.

      • On a more serious note, though, the reason why I addressed this is because I’ve seen so many people who seriously believe it. I’m sure that it’s used often as a joke, but given the common American stereotypes about Russia/USSR, it’s easy to see why it’s taken seriously by some. And Internet being what it is, such serious misinterpretations spread around.

  10. I had a M10X Elite and it had a very bad problem ejecting rounds…every other round…i used at least 4 types of ammo before i sent it for repair and it was sent back to me with the same problem! Not worth the price!

  11. I was one of the first buyers of the M10X Elite when it first came out last year. I had absolutely zero problems with it and it shot like a dream. I couldn’t have been more happy and my local gun shop was able to get me one for around $1350 to boot! But the best part of purchasing this rifle was the free upgrade offer they made to all M10X owners who had purchased this rifle before March 1st 2016.

    free Upgrade included:

    BOLT: New high corrosion resistant extractor installed. New extractor axis that eases its replacement.
    GAS PISTON ROD: New improved design to operate more reliably at extreme temperatures.
    EXTRUSION: Added features in order to improve the life expectancy and operate with a larger variety of hi-powered ammo. Increased the scratch resistance by upgrading to Type III mil spec anodized finish.
    Charge handle: Improved the ‘latch paw’ for better performance and reliability.
    Upper/Lower Receiver catch/latch improvement: Enhances accuracy and reliability.

    Not only that, but I’m also getting the new Magpul Zhukov side folding stock installed for free while it’s in for the free upgrade.

    I can’t say enough good things about the M+M customer service, these are good people who truly care about pleasing their customers.

  12. Credit to the author. That is one of the most detailed gun reviews I have ever seen. I’m not particularly a fan of the rifle or the AK platform, though Valmet’s are very nice, but it was a joy to read. Nice work

  13. AKOU did a review on the rifle. Wasn’t reliable. Others had issues with it too.

    Pass.

    Components don’t seem up to snuff. As Robski said this is fine as a range gun/hunting rifle, not a fighting rifle. For the price they are asking I would rather get the IWI Galil ACE, a more durable, reliable, and combat proven system adopted by numerous countries including those in war zones/hot spots like Ukraine, Mexico, Haiti, Colombia, and South Sudan just to name a few.

    Will still take my AK’s over this.

  14. I have an M10x and it is as reliable as my Arsenal 107. The action feels much smoother and I’m getting better groupings with my M10X. The guys from M+M have a service second to none in the industry. I’m more then happy to support a company that guarantees 100% US manufacture and are leading innovation. The quality of the rifle is superb and I’m sure these rifles will soon become mainstream.

  15. I’m surprised to see the “SHTF” term used in a review of a new and almost completely proprietary rifle.

    Surely when considering any gun for SHTF plans, you would take into account the availability of potential spare parts. With so much of internals of this rifle being unique to the design, it would be one of the worst possible choices for parts availability. (Unless it takes off and becomes a runaway success).

  16. Well from reading all the reviews and with a bit of support it might be very likely M+M might become a big success. We need to embrace manufacturers that are coming with innovation and are producing 100% in the US. I’m sure these guys have spent a fortune getting this thing on the market and they are already making an impact. I’m sure some larger manufacturers don’t like it when a small company presents more innovation in one single product then what they present in over a decade. I saw M+M Booth at the shot-show and they had their rifle completely dissembled on a table next to a dissembled AKM and their new rifle had roughly half of the parts. The M10X was so simple that it got me thinking why has nobody else done it. I personally cant wait to get my hand on one of their rifles.

  17. Did you have to include dumb stereotypes and ethnic slurs in your review? About “illiterate peasants”… Russia has an 80% urban population and a 99.7% literacy rate. Also, the highest university grad rates in Europe. “Ruskie” is an offensive, ethnic slur. I bet you would not be using “k1kes” in a Tavor review, would you be? Also, Red Army Standard is not a “lowly Russian ammo”. It’s actually Romanian and is shittier. By the way, the US made 7.62×39 mm ammo did not fare so well in a recent test by AK Operator’s Union. Terrible standard deviation for such a “superior”, precious brass case ammo .

  18. One more soulless and unproven bullet delivery system. Good luck getting parts for it in China, Syria, South Africa, the US or anywhere else. Pass.

  19. Hello. I just recently purchased a new M10X from Atlantic Firearms. Have had a tough time
    getting a hold of M&M Industries tech staff. I have only shot 2 (30-round) mags through mine and I had 2 bad FTE which caused the fired round to interrupt the feed of a live round from the magazine (the one that came with the gun). I am shooting non-match grade brass ammo by the way. The gas setting is at 2 from the onset, I have not changed it. Could it be getting too much gas for the ammo I am using? I would like the reliability to be better than what I am seeing for the cost of the gun. Thanks.

  20. Very in-depth review, but not INE mention about whether or not the rifle has bolt hold-open capability like an AR, or not, like an AK, on an empty mag. Glaring omission. I assume it doesn’t, given that it uses standard AK mags.

  21. Hi Marc,

    The Bolt Hold Open is controlled by the mag not the rifle, if the mag has a ‘bolt open’ end it will hold the bolt open if not it will close.
    I own two AK-47s and I have placed my order for the M+M 10xz.

LEAVE A REPLY

Please enter your comment!
Please enter your name here