Previous Post
Next Post

D7C_1602

STI is under new management. A gentleman from Taos, New Mexico took a shine to the Texas gunmaker and added it to his portfolio. Smart move. (They’ve got an average eight-month backorder for their firearms.) As regular readers will know, STI makes top quality guns for the top end of the market, designed and hand-finished for both carry and competition. The STI HEX Tactical SS single stack is one their newest models, blending 1911 functionality and concealability with 9mm capacity and reduced recoil. Best of all worlds?  . . .

D7C_1598

The HEX Tac has a heavy four-inch barrel, requiring no tools to disassemble or reassemble. Combined with the steel frame and the 9mm caliber, the HEX Tac’s barrel helps reduce muzzle rise. The result: a gun with a shorter sight radius that not only carries well, but returns to target with life-saving alacrity. More on that later . . .

The HEX Tac’s extended magazine well is wider than normal — and for good reason. The pistol doesn’t print when carrying inside-the-waistband, while still providing extra room for fast reloads. An ambidextrous thumb safety comes standard. I used to dislike an ambi safety on a carry gun; I was worried it was likely to become disengaged. After carrying a few guns with ambi safeties — including a full length Les Baer — I’ve never had this happen.

The reason I like the ambidextrous safety now isn’t so much the ability to use the safety with my left thumb. It’s picking up the gun. An ambi safety on a 1911 makes the handle sit up off a solid surface; I can pick up the gun faster and get a solid grip more quickly. The odds of needing a fast gun recovery are greater than the odds of having to fire the gun left handed (after disengaging the frame-mounted safety).

D7C_1596

D7C_1595

The HEX Tac’s sights are one of the only two combinations I find acceptable for a “tactical” gun. Ideally (for me), the front sight must be either tritium or a bright fiber optic unit. The HEX Tac sports a red fiber optic front sight; there’s nothing better for picking up that sight in the daylight. In the dark, I prefer tritium. But any light at all — as in any light bright enough to see your target — will illuminate the fiber optic from sight enough to shoot. The HEX Tac’s rear sight is the Heine sight I’ve grown to love. I can easily use it to rack the gun one-handed off my pocket, boot or belt.

D7C_1593

The HEX Tac’s two most prominent features: the large hexagonal cuts on the sides of the slide and the tri-topped milling of the slide itself. I’ve always liked a flat top slide. It makes the sights pop. The HEX Tac’s front sight is a variation on that theme, with two angular cuts on the slide up to a thin flat top. The geometry drives my eyes to the sights from behind the gun as I raise or lower the muzzle, and they look pretty cool too. The textured cuts on front and back of the slide certainly do their job, but beware . . .

D7C_1601

I like a heavy textured carry gun with aggressive grips and slides. That’s because I’ve worked guns in gloves in the bitter cold. Also, as a medic, I’ve held a pistol in one bloody hand while holding a patient with the other bloody hand. It’s an experience that’s taught me to value those deep valleys in the HEX Tac’s metal skin.

There is a price to pay for that grippiness. If you don’t pay attention to your technique, the HEX Tac will remove skin and meat from your hand. When I used a little too much grip to lever down on the gun, my thumb pushed over onto the slide. Normally, it wouldn’t be a problem, and I wouldn’t even notice it.

The first time out, the HEX Tac’s rear slide’s big cuts acted like a cheese grater on my thumb. I spent the rest of the session wiping blood out of those grooves in the slide. But hey, it was a good lesson in proper grip technique; riding the slide with your thumb can induce failures.

Although it has a lot of angles, the HEX Tac was snag-free in either a leather outside-the-waistband holster or my well-used El Paso Saddlery inside-the-waistband summer special. The HEX Tac’s dimensions are almost identical to my current EDC (STI Duty One 4.0). My holsters all worked with it so I was comfortable with how the HEX Tac draws. Yes, the sight radius of a five-inch slide is nice, but the four incher rides easier on my hip, draws faster and points better.

The heavens had opened up before my range time at the Best of the West Range in Liberty Hill. I was cleaning the mud out of the HEX Tac’s maganizes after dropping them to the ground when I got an idea.

20160427_122548

I intentionally loaded rounds into a muddy magazine. The HEX Tac ran just fine. I ran a mixed ammo can of everything from 80-grain Ruger Polycase to 147 grain American Eagle FMJ’s through the gun with zero malfunctions of any kind.

I had one issue on the HEX Tac that I’ve had with some other 1911s, but never with an STI. Shooting the gun with my right hand only, with a high grip and my thumb on the thumb safety, the grip safety wouldn’t engage enough for the gun to fire. The high grip with my long, thin hand was creating a pocket for the safety and wasn’t depressing it far enough.

Though rare, people with similarly slim hands may have the same problem. STI or any competent gunsmith can change this for you, so that any grip that allows you to hold the gun and depress the trigger will reliably disengage the safety.

The HEX Tac’s accuracy is very good, but not exceptional. Like the STI DVC, the HEX Tac didn’t like the 147 grain American Eagle rounds, scoring a  3.5″ group. Firing Team Never Quit 100 grain frangible hollow points rounds off a bag at 25 yards I scored a more respectable 2″ group, with Winchester White box 115grain FMJs printing all around that.

As the HEX Tac was so controllable, I fired it again a day later to see if I could do better. I couldn’t consistently get below the 2″ mark. That’s certainly respectable, but the HEX Tac is high-end gun that should do better (IMHO).

All firing was done after the reliability testing. As usual, the gun was never cleaned at any point during the testing. It should also be noted that the gun was well fired and dirty when it came to me, so I don’t really know how many rounds went through it and shooting it clean, or cleaner, may improve accuracy.

D7C_1606

The HEX Tac is the gun that convinced me that a 9mm 1911 carry gun is better than a .45ACP 1911 carry gun. Obviously enough, it’s significant easier to make follow-up one-handed shots with the 9mm gun than the .45ACP. Sure, the .45ACP makes a larger total wound channel than the 9mm. But take it from a combat medic, the difference is academic, and doesn’t make up for the increased capacity, accuracy, and reduced time to get back on target offered by a 9mm firearm. If this gun came with an aluminum frame, the HEX Tac would be my EDC.

D7C_1597

I’m not writing another STI review for a while. It’s not because they aren’t great guns. They are. It’s because they’re boringly great. At this point I know that an STI gun is going to shoot accurately and reliably. I’ve put over 4,000 rounds through STI guns for thetruthaboutguns.com. In all of those, I’ve had a total of one failure, and that was almost certainly from an overpressured round. So the next gun I review won’t be an STI, but the next pistol I buy might be.

SPECIFICATIONS: STI HEX Tactical SS 9mm

Frame – Steel, accessory rail, narrow extended magwell
Barrel – 4″
Weight – 40 oz. (my scale)
Finish – Cerakote, black
Capacity – 10 rounds
Trigger – 4-5 Lbs.
Sights – Rear ledge and fiber optic front
Grips – VZ Alien
MSRP – $2,099

Ratings (out of five stars):

Style * * * * *
It gets a lot for being a 1911, but sometimes that rail can just destroy the lines of Browning’s design. The cuts to the slide, both texturing and the tri top, actually compliment the rail and make it work. Plus, the bonus of the quality grips really make the gun look great.

Accuracy * * * *
More than very good, just not amazing.

Reliability * * * * *
It shoots every kind of bullet, and mud, flawlessly.

Customization * * * * *
It’s a 1911, you can change just about everything on it and get it all from STI. That said, other than setting it up with tritium sights, this is how I’d do it.

Overall * * * * 
I’ve been carrying a gun similar to, but not exactly like this gun, for years. Over those years, and because I get to shoot a lot of different guns for TTAG, I’ve imagined what my next perfect EDC would be. What I kept coming up with: something a whole lot like the HEX Tac. If the grip safety was less sensitive and the gun was lighter and a tad more accurate….

Previous Post
Next Post

22 COMMENTS

  1. Love to see how this compares to the 4″ EMP, apart from it being $800 more. I’ve been running a 3″ EMP for the past 7 years and it’s my EDC, even though I have Glocks, M&Ps and others…

    • I used to have an EMP 9mm, I now have a Dan Wesson ECO 9mm, and I recently shot a friend’s STI 2011 carry 9mm, and I’ve recently shot an Atlas 2011 in .40 (the best handgun I’ve ever touched, I’ll be getting mine shortly after annual bonus day).
      The differences are pretty subtle, but you do definitely get a better gun the more custom it gets. The slide gets smoother, the trigger gets more consistent and crisper, the safety feels more distinct, parts rattle less, etc.

      It might not be worth it, depending on your own finances and needs, but if you can spare the dollars without crying, you’ll be happy you did.

  2. I have the same problem you mentioned with the grip safety with my CK arms, which is built on an STI frame. every once in a while, when I don’t get my grip just right, I fail to engage the grip safety. kinda annoying considering getting as high on the grip as possible is considered good form by most.

    • You can also have a gunsmith tweak the grip safety so it engages with less travel. But carrying a CZ is a very nice option as well.

  3. OMG, high grip on 1911 not activating the grip safety, say it isn’t so. Someone told me “any competent gunsmith can fix that”. If I grip almost any 1911 like a CZ, I run into the same issue. The big flaw with any 1911, the way the grip safety was designed, it is activated by the lower part of your hand. And I really run into that problem when drawing from a canted holster as I’m applying forward pressure to clear the holster an get a good hand position to deactivate the thumb safety. On a straight vertical, no so much, but who CCWs a straight vertical holster?

  4. Damnit. I was thinking about getting an optic for my AR-10 for my next gun-related purchase after my 229 comes in. Now, I’m thinking about an STI. There are a few places out there that sell them at serious discounts. I kind of want a double stack 9mm in Commander length, but I also want a classic single stack .45. And a 10mm.

    I think some of these TTAG reviews will be causing divorces.

  5. Holy crap, all the bitching about the grip safety. If its that bad for you theyre fairly easy to disable entirely. Even without it the 1911 is still a fortress of safeties.

  6. When shooting my favorite, the .45
    Aim for the pelvis and work with the natural rise of recoil and work up the follow up shots. Up the ladder. Also avoiding possible body armor on initial contact.
    Why does everybody fight to come back down ?
    Makes sense?

  7. I have a STI Hex Tactical dbl stack with a 3.7 barrel. I wish it was a 4 inch barrel instead , anyone have a comment. All videos show 4 inch barrels, probably better. Mine is 9 mm

  8. Bought this in .45 ACP and didn’t consider the price too dear for what I am getting; a gun I can use until my great grandson is ready for it down the line. I have a Wilson Combat 4″ 9mm 1911 but alas, no rail! I prefer a big light and laser combination. The .45 Hex tac disappears inside a Black Point tactical OWB with a Streamlight TLR2 G on it. It’s an investment. that said, I carry the Glock 19 more because i don’t want my gorgeous 1911 taken in as evidence in the event of a defensive shooting so the HT is a BBQ gun.

LEAVE A REPLY

Please enter your comment!
Please enter your name here