Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS Precision (image courtesy JWT for thetruthaboutguns.com)
Previous Post
Next Post

On a recent hunt sponsored by Remington, the product rep brought out several new models. I’d reviewed some of them before, some favorably some not so much. Of course, the one super-cool thing they had there was embargoed until next year. I thought I’d shoot some pigs, maybe some deer, but otherwise nothing caught my eye. Until one rifle did. I had previously dismissed the Model Seven just as the 700’s little brother. After some range time with this great little gun, I think the Model Seven SS HS Precision is the Remington bolt gun I should have been hunting with all along.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS scroll mark (image courtesy JWT for thetruthaboutguns.com)

The lesser known Model Seven is the “compact” version of the 700 released in 1983. The entire receiver ½” shorter than the standard short action 700. The bolt is the same 3 piece bolt as the 700, but it’s obviously shorter as well. I had always discounted the Seven as a “less than” version of the 700.  It’s nothing of the sort.  It’s just shorter, and therefore doesn’t fit as many different cartridges.

There are a few differences between the Seven and the 700 that mean many key parts are not interchangeable. If the Model 7 has a weakness, that’s it. It’s just not as widely accepted as the earlier 700, and there’s not as much aftermarket support for it. For a true detailed look at all the differences, I’d recommend looking at the parts catalog from Brownells. Here for the Seven, and here for the 700.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS caliber marking (image courtesy JWT for thetruthaboutguns.com)

The Remington Model 7 is limited in chamberings. Obviously, with a receiver slightly shorter than a short action, there are no long action calibers. The .308 Winchester rifle I tested is the heaviest chambering offered. It also comes in 6.5 Creedmoor, 7mm-08, and .243 Winchester. Chambered in 7mm-08, this rifle would be about the perfect combination for an all-round Texas hunting bolt gun.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS magazine (image courtesy JWT for thetruthaboutguns.com)

Pull off the receiver and you’ll find the same pass through metal and full length aluminum bedding block found on their exceptional 5R rifles (which I bought after my last review. Many pigs and a couple of deer are sorry for it.) HS Precision has been famous for their stocks.  Specifically, becoming a longtime standard for stiffer-than-a-board precision stocks, and Remington’s inclusion of them in several of their rifles is a welcome addition, especially at the mid-range price point.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS trigger (image courtesy JWT for thetruthaboutguns.com)

The trigger on this model is one of the newer adjustable X-Mark Pro Triggers. Like the 5R’s, it is light years beyond the old, duly recalled triggers of the 700s. I’m a trigger snob, but I see no reason to upgrade a crisp trigger you can set below 3lbs, which is what you get here.

The bolt handle is the same as the stainless 700’s. It’s well textured with a bead-blasted finish. Driving forward with the web of my hand, the short throw made fast loads and reloads simple, which is especially nice on a running group of feral hogs. Or, I guess, from their point of view, not so nice at all.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS bolt (image courtesy JWT for thetruthaboutguns.com)

This was a Trial and Evaluation gun that had already been hunted with before I got my paws on it. Heck, it had taken a gorgeous 10 point buck earlier that very day and still had a few blood specs on it here and there. But the bead-blasted finish on the stainless steel looked great. Even better, the stock-to-metal fit was good, with no obvious gaps or chips. Coming from HS Precision, this didn’t surprise me.

What did surprise me at this price point was the jeweled bolt. I’ve mentioned before how on lower priced models of some guns, the jeweling was done haphazardly, making for a worn appearance. This was done quite well, and gives the gun a fine custom shop look.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS jeweled bolt (image courtesy JWT for thetruthaboutguns.com)

The lightweight barrel is free-floated, but without the yawning gap I’ve often seen between the barrel and stock with thinner barrels on precision stocks. Because the Model Seven’s footprint is a little different than the 700’s, HS Precision had to a make a different stock anyway, but it was good to see they didn’t just cut a “one size fits all” barrel channel.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS jeweled bolt (image courtesy JWT for thetruthaboutguns.com)

I was a little concerned about the accuracy of the rifle. Billed as a “fast handling platform” the entire gun was built to be light. It’s only six pounds total. To pull that off, especially with the heavier stock, Remington has included a 20-inch light contour barrel. I’m not a fan of light contour barrels. They heat up too fast, they whip around too much, and far too often show poor results on the bench.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Barnes Bullets Ammunition (image courtesy JWT for thetruthaboutguns.com)

Off a less-than-ideal bench set-up and using a nine-power Leupold hunting scope, my shots with the Model Seven averaged a 1-inch five-round group at 100 yards using the Barnes Vor-TX 150gr TTSX BT commercial cartridge. I shot some of the 175gr BTHP surplus rounds I had in my truck as well, and those five rounds shot at 1.25”. That includes a called flyer.

One-inch groups with store-bought ammo makes the reloader in me giddy. I know I could get this down to ¾ MOA with a pet load. Even with commercial rounds, the precision of this lightweight rifle means a competent marksman can ethically take any North American game animal, including elk, save grizzlies, at 300 yards or more.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS at rest (image courtesy JWT for thetruthaboutguns.com)

I had no issues with any round loading, firing or ejecting. I had no issues with single-loading individual rounds, or going through the magazine. The magazine never failed to swing in and lock easily or release easily as well, and never bound while loading rounds.

As you can expect, the ease of use and handling of this rifle was outstanding. It’s just a great little gun. For those of you that want an accurate, easy-to-use short action rifle, this thing is about perfect.

The Model Seven provides what most hunters actually want. A compact, capable bolt-action rifle that’s easy to carry, easy to get in and out of a blind or a vehicle, and shoots well. I’m sorry it took me this long to find it. These rifles won’t hit the Remington website until later this year, but can be ordered now directly from a Remington dealer using the order numbers listed below. I’ll take mine in 7mm-08.

Gun Review: Remington Model Seven Stainless Steel HS Precision
Remington Model Seven SS HS with happy Redneck (image courtesy JWT for thetruthaboutguns.com)

Specifications – Remington Model Seven SS HS Precision

Order Number: 308 Win – 85970, 6.5 Creedmoor – 85971, 7mm-08 Rem – 85972, .243 Win – 85968
Caliber Tested: .308 Win (other calibers available)
Magazine Capacity: 4 rounds
Barrel Length: 20 inches
Overall Length: 39.25 inches
Barrel Material: Stainless steel
Barrel Finish: Satin
Stock: HS Precision
Weight: 6 lbs (unloaded, without optic)
MSRP: $1,249

Ratings (out of five stars):

Style and Appearance * * * *
The green of the stock goes surprisingly well with the bead-blasted stainless. I wouldn’t have guessed this combo, but it works. The metal-to-stock fit is above average, and the finish is smooth and even throughout. The jeweling on the bolt is a nice touch.

Customization * * *
There are fewer calibers, fewer stocks, fewer triggers, fewer everything available for the Model Seven when compared to the 700. When compared to most other lightweight models, it’s got about the same number of options.

Reliability * * * * *

If your arm works it works.

Accuracy * * * *
I’d have liked to see this rifle break the 1-inch mark, which more mid-priced rifles are doing these days. Still, 1-inch groups with a thin contour is very good.

Overall * * * * ½
I can’t give a bolt gun that didn’t get under 1” groups five stars, but that’s about it. Obviously, this rifle surprised me, and in a very good way. An outstanding Hill Country rifle.

Previous Post
Next Post

25 COMMENTS

  1. I can get a Weatherby Vanguard for the same price. With that Weatherby, I get a once piece sleeved bolt, a sub moa accuracy guarantee, flat bottom action that was machined AFTER heat treat, and a two stage trigger.
    No Remington for me until they come a long way from where they are now.

  2. So when you say “the precision of this lightweight rifle means a competent marksman can ethically take any North American game animal, including elk, save grizzlies, at 300 yards or more.” what exactly does that mean?

    I assume it has to do with POA/POI vs vital area of the specific game?

  3. I have been very happy with my 700 BDL in 22-250. The model 7 here seems great though I’m most intrigued lately by the Sauer 100 ceratech.

  4. Yes I really like the Mod.7 , I’ve always been a long barrel heavy rifle type, after hunting with the Mod 7 in 7-08 it’s just the ticket for old legs and steep hills.

  5. I would buy this rifle in 6.5 creedmoor if it had a threaded barrel. Since it doesn’t I will pass on it.

    By any chance is there enough thickness to the end of the barrel to have it threaded? Looks a little too thin to have it threaded in 5/8″ x 24.

  6. The first review of this rifle that I read said that Remington was disappointed in the accuracy of free floated barrel and had a pressure point added. Are you sure the barrel was free floated on this rifle?

    My experience with the thinner barrels like on Model Sevens and Mountain rifles is that they do shoot better with a pressure point than free floated.

  7. I just bought one of these rifles and took it apart to clean it. The barrel is NOT free floated as stated in this article.

    • Mr. Woodell, I’m not sure you understand what “free floated” means if you had to take apart the rifle to find out. I use a business card, wrapped around the underside of the barrel of a complete and assembled rifle, down to about an inch or two in front of the receiver. If it doesn’t catch on anything, the barrel is free floated.

      • I know exactly what free floated is. I also know the ways to check to see if a barrel is free floated. I just stated that I saw the pressure point in the stock when I took apart the rifle to clean it. I always strip down a new gun and clean / inspect it before I shoot it. The barrel on my rifle is not free floated. There is a very prominent pressure point in the forearm. You can not slide anything between forearm and barrel when the rifle is assembled. I suspect that they are all the same. I can’t imagine why Remington would have HS Precision make some stocks with pressure point and some without pressure point.

        • David, you are correct on the pressure point..I have one also on my model 7 with the HS-Precsion..

      • Mr. Woodell is correct the, Remington engineers decided the model 7 shot better with a pressure point on the barrel..Me being a Gunsmith and owning a model 7 with the HS- Stock with pressure pad, I lightly sanded the pad down until the barrel floated, I then shot some groups, and with this particular rifle (243) it definitely shoots better with pressure point..

        • Most rifles with lightweight barrels shoot better with either a pressure point or fully bedded. Not all mind you but most. Barrett Fieldcraft barrels are fully bedded and mine in .308 will shoot .5 MOA all day long. On the other hand a mini action Howa in 6.5 Grendel that I like a lot is more accurate floated. Both have very thin contour barrels. My Christensen Arms Mesa in Creedmoor comes free floated but shoots better with some pressure. Moral is, it takes some tinkering to find what works best with a particular rifle.

  8. I have this rifle in 7mm-08. I have not been too excited about Remington products in quite a while but liked the way this rifle “felt.” I thought it would make a good pronghorn/muley rifle for packing in Wyoming. I wasn’t wrong. Handles, carries, and shoots very well out of the box. Factory Nosler Ballistic Tips grouped just under 3/4” for thr first 20 rounds while breaking in the barrel. Impressive. May need to buy another in 6.5 Credmoor or the good ole .308!

  9. Comments from an old dude who has loved the Model 7 since it’s inception. The barrel channel on the HS definitely has a molded in pressure point. Interestingly Barrett fully beds the thin barrels on the Fieldcraft and mine in .308 shoots sub half MOA consistently. The Barrett is a nicer rifle and comes with a Slick Timney trigger and weighs about a pound less. But seems to me that comparing the Model 7 HS to a fine rifle Costing nearly twice as much is quite a tribute to the little Remington.

LEAVE A REPLY

Please enter your comment!
Please enter your name here