Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Previous Post
Next Post

Colt’s newest 10mm 1911, the Two-Tone Delta Elite with Novak sights, borrows the cool of high-end custom 1911s from the 10mm’s early years.

Fans of the 10mm owe a lot to the Colt Delta Elite. Sure, the Bren 10 gets all the hype, but that gun got more years on screen than it did in actual production. It was Colt’s iconic Delta Elite that kept the 10mm going long enough to last though the 80’s, the 90s and to today’s resurgence of the higher power, high pressure pistol round.

Initial production of Colt’s Delta Elite started in 1987, just a year after the financial failure of Dornus and Dixon Enterprises and the Bren Ten. Few manufacturers jumped on the 10mm wagon, and if you wanted a 1911 in 10mm at the time, there weren’t many options other than the Delta Elite.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

The FBI would famously pick up the 10mm, fielding the Smith & Wesson 1076b and 1026 in 1990. The FBI found that many agents couldn’t handle the recoil of the full power 10mm cartridge, as well as some other issues, so they watered it down to the “FBI light” loading. This eventually led to the .40 S&W and the demise of the 10mm as the FBI’s duty caliber. It didn’t last long.

If you’d like to read up on the full history of the 10mm, there’s no better source online than Bill Vanderpool’s article from 2018 in Gun Digest.

Colt dropped the Delta Elite in 1996, only to pick it back up again for a debut at the SHOT Show in 2008.  In its time, the Delta Elite has gone through a few different variations, but with no real significant changes.  That 2008 Shot Show re-release had a bushingless bull barrel, but by 2009, when it was actually released to the public, it was back to a standard bushing style barrel, as it stands today.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

The Colt website has listed a railed version for a couple of years, but the most recent limited and likely highly collectible release is the two-tone Series 80.

Two tone 1911’s were the mark of a custom gun in the late 80s and 90s, and like all things of that era, they’re enjoying a bit of a comeback. Andy why not?  Unlike glam rock, the two-tone black and brushed stainless is a great look. With the Delta Elite and its Delta logo accented black grips, that’s especially true.

The black composite checkered grips, set off by the bright red Delta logo, look great. That triangle has remained an iconic logo for the Delta Elite, and it ties in even better with the black slide. They’re also just good grips, providing a non-slip surface for the fingers and palm in firing.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

The Delta Elite comes with legit Novak (not “Novak Style”) three-dot sights. These have remained popular for decades for good reason. They allow for precise shots while also grabbing the eye and making the front sight stand out. The rear sight is a ramp, and I would prefer a ledge for any kind of daily carry gun just in case you needed to manipulate the slide single-handed.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

Like all of Colt’s base model 1911’s, the front strap remains smooth. This feature has always disappointed me, as it is one of the first things almost everyone does to their Colts during customization. On the 10mm, checkering there is not just pretty, it’s pretty necessary.

I shot the first few hundred rounds from this gun in 90 degree heat and high humidity. I was dripping with sweat before I started shooting and my hands were downright slippery by the time I finished. The smooth front strap didn’t help me control the recoil of the 10mm auto one bit.

Some of the previous releases of the Delta Elite included a wraparound rubberized grip to help the shooter keep purchase on the pistol. The new two tone version, as well as the new brushed stainless version, omit the wraparound front strap. This version looks better, but I was missing that texturing during long strings of fire.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone semi-automatic 10mm pistol (image courtesy JWT for thetruthaboutguns.com)

The trigger on this Series 80 gun is pretty good. A Series 80 trigger can, despite popular opinion, be made great. With a trigger job performed by a competent gunsmith, it’s unlikely you’ll be able to feel any difference between a classic Series 70 gun and a Series 80 gun. I certainly can’t, at least not when actually firing the gun.

The hammer falls at a reasonable weight, averaging 3 lbs 11oz on the Lyman digital trigger scale over five trigger pulls. There’s a little bit of squish after a short amount of take-up. In general, it’s good, but needs some work to be anything remarkable.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

Like most stock Colt 1911s, there are lots of edges and angles on the Delta Elite, and most of them don’t bother the shooter at all during firing or carry. On this particular gun, there’s one that does. The bottom of the trigger guard, close to the grip has a natural point on it. This one is particularly sharp.

There’s not an obvious burr on the metal, but it definitely digs into the top of the knuckle on the middle finger of the firing hand. Like a whole lot of shooters, I have a callus in that spot. Despite this, the Delta Elite did a good job of cutting through it on this review and made shooting uncomfortable after a few hundred rounds.

If you are new to 1911s, you might not notice all of the “extras” you get on the Delta Elite. That’s not at all a bad thing, as it shows how far the industry has come. Details like the extended beavertail and the commander style hammer used to be price custom work, and are now included on quite a few models across many brands.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

The Delta Elite’s frame is undercut to allow for a higher grip with the dominant hand, and it also sports a three hole serrated trigger. You’ll also note the extended thumb safety.

I saw these same controls first on my Colt Combat Elite. The Combat Elite is my favorite gun Colt has ever had in its 1911 lineup, partially for these controls. The thumb safety is a great example. It’s large enough to never miss on the draw, and also large enough to be a small ledge for the shooting hand thumb if you want to keep your thumb pressing there during firing.

It’s also small enough to be out of the way, and should you decide to bring your thumb down and off the safety for firing single or two handed, it’s simple enough to just slide the thumb over and off.  It’s the perfect happy ergonomic middle ground.

The shooter will also find a small but easy-to-reach textured magazine release. I ran the Delta Elite with 2 Colt 10mm magazines and one from Wilson Combat. I had no issues with the magazine ever failing to lock or eject easily with a push of the button. I also had no issue running with a full magazine and one in the chamber with either Colt or Wilson Combat magazines.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

The magazine well is not flared or beveled. Like a serrated front strap, this is one area where now common custom features simply didn’t make it to the relatively low-priced Colt.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

You’ll also find the ejection port has been lowered for increased reliability in less than ideal conditions.

If you have issues with grip strength, the Delta Elite is not for you. The necessarily stiff recoil spring wrapped around a GI style guide rod means that a firm grip and a good push pull is required to bring the slide to the rear and lock it.

This is, however, greatly assisted by the large, deep Colt Gold Cup-style rear cocking serrations. This is another now classic feature that started on competition guns and found its way into fighting pistols. They aren’t particularly fancy. They don’t spell anything out. They work.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

When it comes to reliability, I had no issues at all with the Delta Elite. Over the course of a couple of weeks, I put 660 rounds total through the gun, with the first 500 rounds in the first two days. I lubed up the gun with CLP prior to shooting, and never cleaned it or even wiped it down until the full review was done and I was ready for photos. I ran both flat point FMJ and hollow point ammunition through the gun without a single hiccup.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

The Colt retains pretty good accuracy through a wide range of loads. Several 180gr FMJ rounds scored around 1.5″ on average. That’s exactly where the Armscor 180gr flat point FMJ round scored, 1.5″ for five shots averaged over four shot groups. Federal’s Trophy Bonded Bear Claw 180gr hollow point scored a bit worse, averaging 1.8″ for the box. The best performer was the heaviest round, the Bufffalo Bore Heavy 200 gr FMJ round, scoring at 1.4″ on average.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

That Buffalo Bore round is generating over 600 ft/lbs at the muzzle and is moving at 1,200 fps out of the Delta Elite. Given that energy level, and that precision potential, this firearm is a legitimate feral pig and Hill Country white tail deer hunting round out to about 50 yards. It’s point of aim is the point of impact, within an inch, out to those ranges.

At the power levels most companies load the 10mm round to, recoil is not too stiff at all. Of course, if it’s compared to a full-frame Government 1911 in 9×19, the 10mm is going to feel like a whole lot of gun.  That’s not because it is, it’s because the 9mm isn’t.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

The Delta Elite has a traditional barrel set up. This is not a “supported chamber.”  Note the small amount of space left open on the case in the photo above. The sometimes-justified fear is that, as the 10mm’s pressure can rival and sometimes even exceed that of the .357 Magnum, this section where there’s no barrel wrapped around the case has the potential to bulge and rupture.

None of the rounds I shot, including the Buffalo Bore rounds, exhibited any undo stretching or bulging near the head of the case. Reloaders seeking to get the maximum ballistic performance out of their 10mm loads should only use new brass, and be careful about what you buy. I’ve reloaded 200 and 220 grain rounds to their SAAMI pressure peak in the Delta Elite before, and by using Starline cases and careful practice, never had any issues. Case selection is extremely important at the highest pressure levels.

At the top end of the scale, like the heavier Buffalo Bore rounds, the recoil is pretty snappy. Buffalo Bore loads these pretty hot, as I can’t find any 200gr loading on the Hodgdon reloading website that gets me within 100 fps of Buffalo Bore’s published data, and it’s been my experience that Buffalo Bore’s published numbers are accurate. If you are used to fast follow-up shots from your 9x19mm or standard pressure .45 ACP, expect your split times to slow significantly with the heavier 10mm loads, especially single-handed.

I understand that some people carry the 10mm for bear defense. For black bears that seems perfectly reasonable. For grizzlies, 10mm, no matter how many you have in the magazine, is underpowered. I’m sure both experts and amateurs will disagree, but having seen some up close and unafraid, it seems a bit light to me. A tube of 12 gauge slugs seems more appropriate.

Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)
Colt Delta Elite Two Tone (image courtesy JWT for thetruthaboutguns.com)

The Colt 1911 is my standard for the stock 1911 pistol. That is, it’s the minimum bar every 1911 should meet. You can get better, but there’s no reason to go with any lower quality when these are available at reasonable prices.

The new but retro two tone Delta Elite has come out as a limited release with a $1,200 MSRP that was quickly bought out. I’m still finding them at retailers online at full MSRP, and everyone who has it listed at a price under that has them listed as “out of stock”.

Even at full MSRP, this is a good gun. It’s got a lot of bells a whistles that make the gun not only more attractive, but more shootable as well.

Specifications: Colt Delta Elite Two-Tone

Action: Single Action Hammer Fired Semi-Auto
Caliber: 10mm
Barrel Length: 5″
Capacity: 8+1
Safety: Thumb Safety, Grip Safety, Firing Pin Safety
Grips: Black Composite with Delta Medallion
Finish: Two Tone
Stock: Composite Grips with Delta Medallions
Sights: FT: Novak White Dot RR: Novak Low Mount Carry
Overall Length: 8.5
Width: 1.25
Weight: 35 oz
MSRP: $1199 (about the same retail)

Ratings (out of five stars):

Style and Appearance * * * * *
I love a two-tone gun, and with the black grips and the Delta medallion, the newest Delta Elite really looks great. Some of the sharp edges need to be turned down for comfortable shooting.

Customization * * * * 
It’s a 1911. With enough money, you can do anything. There are, however, relatively few options right from the factory at this time.

Reliability * * * * *
Perfect with any round.

Accuracy * * * *
Two inches at 25 yards is now my midline average, and a pistol of this size needs to break 1″ for five stars.  The Delta Elite scores right between those two. That means for anything you really need the gun for, it is accurate past the ballistic performance of the round.

Overall * * * *
This newest two-tone Delta Elite from Colt provides shooters with ballistic authority in a classy package.  Like all traditional 1911s, and unlike most other 10mm auto platforms, it carries easy OWB or IWB. It’s a perfectly reliable handgun that handles recoil well and is plenty accurate. Colt reached back in time a bit for this version of the Delta Elite, and it’s definitely my favorite one yet.  And yes, Magnum PI episodes are playing in the background as I write this.

Previous Post
Next Post

119 COMMENTS

  1. Jon, any aftermarket suggestions on options to address the slick frontstrap, non- grip tape?? I’m digging this colt.

    • I’ve never been happy with the long term use of aftermarket grips. I’d just have it checkered by a professional gunsmith.

    • I used to put a piece of 600 grit Emery paper under the grip panels. (Tyler T grip style).

      Lasted well but no match for checkering.

      I prefer 40 lpi but 30 lpi is ok.

    • I have Talon grips on all my HGs.

      https://talongungrips.com/

      Easy to apply, perfect fit, east to remove if you so desire. Rubbery finish as we ll as a horrible (for me) sandpaper like finish.

      I had to custom cut a set for one of my HGs that they didn’t have a pattern for. That was fun! :^)

      $17 a set.

  2. I have a first-gen, do NOT use Underwood Extreme Penetrators…blew the mag to pieces and case ruptures. Other than that its a tack driver. Upgraded to the Hogue wrap-around rubber grip to tame the recoil, a Wilson Combat guide rod spring and one-piece guide rod too.

    • If it is a first-generation Delta Elite, compare the exposed space of the case with the photo above. Yours likely has a little less coverage than the Delta Elite released after 2008.

  3. Great review and thank you !!!, I recently picked up the Delta Elite 10mm full rail and love it, I contacted VZ Grips and ordered there operator lll grips black and gray and had their custom shop install the Delta emblem in the pannels then ordered the Pierce wrap around with finger grooves that go underneath the VZ Grips, or any grips…. grip problem solved

  4. It’s pretty but my EDC G29 (while most likely way heavier) carries 16 rounds with the G20 mags and is just as reliable/accurate at about half the price… Would probably buy the Colt as a “show piece” but not for EDC… Nice gun, good review thanks for the info… OBTW spread is not that important with 10 mm especially the 200 and 220 grain hard cast lead, first shot @ center mass WILL take all the want to out of the bad guy…

    • The most powerful Firepower you can get in such a concealed package, I also own this weapon, with the XG grip and Glock 20 mags, son hush this is a hand grenade

      • I have 6 G20 mags all have XG grip extensions and extended floorplates (1 extra round) plus the two 10 round factory mags that came with the piece also w/extended floorplate… Appendix or kidney, carries great deploys quickly ready to rock and roll… Love it… swapped barrel for wolf piece and changed sights to tritium, also added lasermax guide rod laser…

  5. I think every government personal protection detail should be armed with this firearm.
    *please give me attention* *I’m still relevant*

    Eric Swalwell 2020

  6. Good review. Anyone who have read my posts know I love a 1911. However, I look down my nose at one in 9mm. Had the opportunity to buy a Wilson CQB in 9mm for a song. Passed. 10mm is a different animal. When I first met the owner of VZ Grips we were both carrying Kimber 1911s. His was 10mm mine was .45 ACP. I hosted John at The Farm for a couple deer hunts. After talking with him I have, off and on, considered buying a 10mm 1911. I just keep running across deals on them in .45.

    • I’m the opposite. Got to shoot a Wilson Combat 9mm 1911 and bought it. Was my EDC for a while. Reviewed it here. Great gun.
      On the other hand, the Delta Elite is the only 10mm 1911 I’m interested in. For the reloader, the 10mm is a bit “80 proof” next to the . 45 Super, so I have no use for it.

    • I preferred the Super 38 and did own a 9×23 for a while.

      Properly loaded they were almost as a good as a 357 revolver.

      9×23 was much easier to work with than the old 38s. I think barrels for 38 super +P are better headspaced now.

      Now I just carry 9 BPLE in my Glock 48.

      • Ha! I had Wilson Combat fit me a . 38 Super for that very same 1911. With a higher power spring and a magazine change, I swap back and forth.

        • It is one of the most impressive cartridges to me.

          Properly loaded, it is one of the flatest-shooting defensive cartridges.

          Unfortunately, I am now feeling the urge to get another Super 38……
          ….maybe two-tone with a Commander hammer and a short trigger….
          …..yeah..that’s the ticket

        • The 9×23 I had came with a 38 Super barrel as well. $550 in 1998….I think.

          Just before prices went through the roof.

          Sold it to a guy who just HAD to have it.

    • I am fortunate enough to own both .45 1911s and a Ruger SR1911 in 10mm. I love em’ all but that 10mm is just……”Boom”. Love it.

      When I do my part the accuracy is excellent with anything I’ve loaded for it. Great gun with a better feel after I changed out the main spring to a #22.

      I like 10mm so much I bought a Ruger GP100 Match in 10mm. That is a lot of fun with full house loads as well.

  7. I might be in the minority here but I like the smooth front strap. I find checkering on most 1911s too sharp and skateboard grip tape is a cheap way to add more grip if needed.

  8. Great review. Nice gun! I’ve kinda’ been prioritising my AR & shotgun. This would work in a riot😏

  9. Plastic mainspring housing or steel as found on the Gold Cups? I think I know. Also… they really need to do the Delta Elite as a Series 70. Call it the Delta Elite “Trophy”, which is the monicker they give to the Series 70 Gold Cups. Colt should do away with the Series 80 altogether. Series 80 design is just a problem waiting to happen. Colt is now fitting barrels pretty good. They still need better slide to frame fit. Also…the barrels have that silly dimple porting. Why doesn’t Colt properly port the barrels? Colt…are you listening?

      • Specialist 38: For Series 70 try a Wolff extra power firing pin spring (and a titanium firing pin if you are that worried). I’ll take the much better reliability of the 70 series any day. All Series 80 systems give problems…which is what you don’t need when a gun is really needed.

        • I never had a problem with any series 80. Every one needed fluffing and buffing…..like any Govt I ever used.

          Could never tell a difference in scores shooting a series 70 vs 80 (I’m the top of mediocrity).

          I do know if you drop a loaded pistol, it tends to land butt first.

          Dont carry 1911s anymore. No dog in this hunt. All my carry guns have a firing pin block or a transfer bar. YMMV

  10. Nice looking pistol. Thanks for the review.

    Not a 10mm fan but the platform is solid.

    A friend in college had an original Delta. Sexy pistol with a commander hammer and regular safety (I prefer it).

    His caused problems with the brass (mostly unusable due to denting near the web) and left brass dust embedded in the top of the slide. Damnedest thing I ever saw.

    Fun to shoot though.

  11. Your work with reloads and BB ammo is good evidence that most ammo is loaded well below too-end.

    Reloading manuals have also down-loaded many rounds over the years.

    I guess they are trying to protect us from ourselves.

  12. After that dream I had about killing Bigfoot with a 1911 .45cal I just might have to go bigger. Man that sob was tuff.

  13. You should see the hooley daubers and Holly hoppers down here in Boogaloo Texas….. I’m just waiting on the Glock 49

  14. SAAMI spec max load for 10mm is 7.1% higher than the .357 although the .357 has 8.7% greater case capacity. If I ever break down and buy a 10 I’d like to get a Delta Elite in some form, but the unsupported chamber might give me pause on that.

    Nice review. Thanks JWT.

    • That’s all rumors and hearsay, with as many cameras as they’re out there nowadays and as many 10mm 1911s sold, you to hear about it or see it…. Buffalo Bore and Underwood are the only companies that come anywhere near the old Norma loads, if anybody had any issues like that, I guarantee they were reloads and loaded too hot to boot and also you can get a conversion from the series 80 to the series 70 from any major online gun parts distributor, my Colt has the 80 but my Rock Island Commander 10mm has a 70, just get some Grease, you’ll know what I mean when you start installing it

      • I suspect you’re right, but I’d want to do my own research on that before plopping the money down. I’m mostly a revolver guy though so there’s a good chance I never will. Already have a .357 and .44 magnum.

        • Ruger fan-boy here, but I did use some of my gubmint money to pick up a Beretta 92 compact INOX. Like all 92s you need to drop in a lighter hammer spring, but otherwise it’s a nice gun and much better for carry. But my regular carry gun is a 3″ GP100. The .44 is a Blackhawk 6-1/2″. A bit bulky for carry.

  15. Great review. I have a RAI 10mm but I wouldn’t mind swapping it for one of these. I prefer the bushing. It’s a lot easier to field strip than a bull barrelled 1911.

    I wouldn’t call the recoil under higher pressure loads snappy. It’s more like stout but a 1911 soaks up the recoil much better than a plastic G20.

    More gun stuff and less politics would take TTAG back to its original mission.

  16. That is a gun worn with a nice suit, I would not turn one down, but sure would not want it put into evidence.
    Just too nice to end up like that.
    `guess it don’t take Glock mags either huh?

  17. A few years back I scored an almost NIB Gold Cup Delta Elite in stainless from a guy needing money at a gun show. Always been a fan of the power of the 10, wish mine had the Novak sights. (I’m not sure what Colt’s reasoning was in the Gold Cup model of a 10mm but at that price I won’t worry much.)

    I also have a bad thumb from a skiing crash years ago and if I’m not careful with my grip I can set the slide stop during firing. Never with any of my other 1911s, even though 10 mm recoil is not bad in this heavy thing it’s enough if I don’t keep a firm grip.

    Nice review.

  18. I have the retro-re-issue love the grips. I did install a Wilson flatwire recoil spring kit as Colt springs and the plastic guide rod are hard to find for some reason?

    No regrets on my purchase.

  19. I’ll be looking at a Colt Delta Elite 10mm tomorrow . For less than half the going rate. I got to check it out.

  20. Would love to own one. Not a first choice if you want to learn how to shoot. A .22 is best for this. Afterwards though. Fine gun. Powerful and accurate. I write. and my spy character uses a Colt Delta Elite .10mm Combat Commander as his weapon of choice.

  21. Federal AM Eagle 40SW 180GR FMJ 50rds

    Federal American Eagle 115 Grain FMJ Brass 9mm 100Rds

    Federal American Eagle 9mm Luger 115gr. FMJ 50rds.

    Federal American Eagle Brass 9mm 124 Grain 250-Rounds TSJRN

    Federal American Eagle Brass 9mm 124 Grain 500-Rounds TSJRN

    Federal American Eagle Competition Ammo Brass 9mm 200-Rounds 115 Grain FMJ

    Federal American Eagle Indoor Range Training Brass 9mm 70 Grain 50-Rounds Lead-Free

    Federal American Eagle Indoor Range Training Brass 9mm 70 Grain 50-Rounds Lead-Free

    Federal Ammerican Eagle 9mm 115GR FMJ 50Rds

    Federal BallistiClean Brass .45 ACP 155 Grain 50-Rounds HRTF

    Federal BallistiClean Brass 9mm 100-Grain 50-Rounds LFF

    Federal Champion 9mm 50-Rounds 115 Grain FMJ

    Federal Champion Aluminum 9mm 115-Grain 50-Rounds FMJ

    Federal Champion Ammunition 40 S&W 180 Grain Full Metal Jacket Aluminum Case

    Federal Champion Training Brass 9mm 115 Grain 200-Rounds FMJ

    Federal Champion Training Handgun Ammo 9mm 100-Rounds 115 Grain FMJ

    Federal F460FS1 460SW 260 Fusion 20rds

    Federal HYDRA-SHOK 40S&W 155GR 20rds

    Federal HYDRA-SHOK 44mag 240GR 20rds

    Federal HYDRA-SHOK 45ACP 230GR HP 20rds

    Federal Hydra-Shok 9mm 135GR JHP 20rds

    Federal Military Grade Brass 9mm 124 Grain 50-Rounds FMJ

    Federal Personal Defense 9mm 147gr 20rds

    Federal Personal Defense HST Nickel Plated Brass .45 ACP 230 Grain 20-Rounds HSTJSP

    Federal Personal Defense Low Recoil Hydra-Shok Handgun Ammo .45 ACP 20-Rounds 165 Grain JHP

    Federal Premium HammerDown Nickel Plated Brass .357 Mag 170 Grain 20-Rounds BHP

    Federal Premium HST .40 SW 180GR HST SP 20Rds

    Federal Premium Personal Defense Ammunition Nickel Plated Brass 9mm 20-Rounds 124 Grain Hydra-Shock JHP

    Federal Premium Personal Defense HST 9mm 150GR JHP 20Rds

    Federal Premium Punch Brass .40 SW 165 Grain 20-Rounds JHP

    Federal Premium Vital-Shok Centerfire Rifle Silver .308 Win 165 Gr Trophy Copper

    Federal Syntech Defense Brass .40 SW 175 Grain 20-Rounds SJHP

    Fiocchi 357GCMJ Fiocchi Centerfire Pistol

    Fiocchi 765B SPC 30LUG 93 JSp 50rds

    Fiocchi 9mm Handgun Ammunition 115 Grain FMJ 50rds

  22. หวย อันดับ 1 มาแรงแซงทุกเว็บ
    เว็บพนันออนไลน์ เว็บตรง ไม่ผ่านเอเย่นต์ฝาก-ถอน รวดเร็ว ด้วยทีมงานคุณภาพ ตลอด 24 ชั่วโมง มีความยุติธรรมและโปร่งใส ไม่เคยมีประวัติการโกงลูกค้า

  23. HUAYDED789 หวยออนไลน์ 24 ชั่วโมง ระบบที่ทันสมัย แทงหวยง่าย โอนเงินไว หวยออนไลน์ที่นี่จ่ายสูง ส่วนลดเยอะ โปรโมชั่นพิเศษสำหรับสมาชิกใหม่ และสิทธิพิเศษมาก มาย แจกเครดิตฟรีอย่างต่อเนื่อง”

LEAVE A REPLY

Please enter your comment!
Please enter your name here