Previous Post
Next Post

p1390737-900x601_1

Threaded barrels. They just make every gun a little bit cooler, don’t they? Slap a threaded barrel on even the common GLOCK 19 and it instantly stands out on the range. Not to mention all the options it opens up for muzzle devices. But what if you have a threaded barrel and aren’t using a muzzle device at the moment? Enter Backup Tactical’s line of spiffy looking thread protectors.

Threaded barrels are cool, but if you aren’t careful, things can go sideways quickly. You could accidentally drop your threaded gun and bend one of the threads out of alignment, rendering the threads instantly useless. Or if they become clogged after thousands of rounds it could take some a chunk of time and elbow grease to clean the gunk out and make it serviceable again.

p1390747

To keep the threads in good working order, prudent owners slot a thread protector onto their barrel when not in use. Most threaded barrels don’t come with a thread protector out of the box so you’ll need to find one on your own. Most companies out there make boring standard thread protectors, nothing more than black metal tubes. But for those looking for something a little more stylish, Backup Tactical may have just the ticket.

unnamed-1

Backup Tactical machines their thread protectors out of aluminum, a material soft enough to not gouge or scratch your threads but tough enough to stand up to the typical wear and tear you would expect on the barrel of a gun. Not only are they functional, but the biggest selling point for Backup Tactical’s product is that they add a little extra flair to your already pimped out gun. Whether you want a laser-etched Spartan, a utilitarian cross-hatch, or even a hot pink camo pattern it’s all possible.

Backup Tactical’s protectors are available in the following pitches:

  • 1/2×28
  • 13.5×1 LH
  • .578×28
  • 16×1 LH
  • 5/8×24

Out on the range, the thread protectors work as advertised. They slot on easily and, just as important, stay put. And they don’t scratch easily.

screen-shot-2016-09-13-at-8-10-45-am

What more do you need? Not every design is my cup of tea, but…horses for courses. There are a few Backup Tactical looks that I’d totally pay $30 for. If there’s one that would look good on your gat, go for it.

Specifications: Backup Tactical Thread Protector
MSRP: $29.99

Overall: * * * *
I’ve seen thread protectors for less, but not much less. The style is where Backup Tactical’s protectors really stand out.

Previous Post
Next Post

27 COMMENTS

  1. I would hesitate about the smooth ones. Getting a thread protector off of your barrel after a few months of running it hard can be a challenge. Without some grippy surface to help transfer the torque, I can see some of these becoming effectively permanent muzzle devices.

      • a very small dab of purple low strength locktite (222 i think) will do the trick. My r/c cars and trucks all get certain parts with blue or purple locktite. Because if its important to the function, it will only fall off during race time, never during practice.

    • I tend to use anti-seize on mine, especially after a particularly heinous Noveske KX5 incident. I still shudder at the forces required to get that thing off my barrel for cleaning. I now buy anti-seize by the ounce, instead of by the gram.

    • Fine internal threads in aluminum are generally considered a dubious proposition by machinists, unless they’re created with a forming tap. I have no idea whether these are cut or formed threads.

      On top of that, if this were left on the muzzle for a long time without removal, one should use some form of anti-seize goop, because aluminum in intimate contact with steel tends to corrode.

  2. I’ll stick with my boring old black protectors with a grip pattern on the outside, thanks though.

    Pro Tip: Don’t drop money on a thread protector for a rifle like an AR. Just thread the OEM muzzle device back on to hand tight or a bit less and use the crush washer that came on the rifle. It’s free and it works just as well.

    • I agree. I put a LWD threaded barrel in my G17 and ordered one of their garden-variety thread protectors. Seems like it was about 15 bucks. works fine for me.

  3. So $30 for a “tacticool” thread protector? We’ve seriously moved into the arena of spending money for the sake of spending money. You can get a perfectly functional protector off Amazon for $7 with free shipping. Especially with the graphics, I can see the plastic wraps (or even paint) boiling off after a day in a 800-900 round class, and all you’ll have to show for it is a sooty Ol’ Glory thread protector. Thank you, but no. I’ll buy another 2 or 3 boxes of ammo for a training class instead.

    • I happened to buy some of those $7 Ebay ones and they work great. The particular ones I ordered were from vendor downrangeproducts. Their knurled ones are grippy and deep.

    • Andrew, I don’t think you can get A2-style birdcage flash hiders for the factory-threaded M13.5 X 1LH barrel.

      But if you have a source, I’m listening…

      • A quick internet search says that HK style ones will fit as do seem Steyer AUG with some mods possibly. I was half kidding but I need a cheap 1/2-36 for my AR. May chop the barrel to 13, thread it and attach a flash can to get the 3″ back.

        Why no one makes a barrel like that as is for 9mm is beyond me.

  4. “You could accidentally drop your threaded gun and bend one of the threads out of alignment, rendering the threads instantly useless. Or if they become clogged after thousands of rounds it could take some a chunk of time and elbow grease to clean the gunk out and make it serviceable again.”

    Ever heard of taps and dies?

    • For the finer threads (ie, > 24 TPI), I’d recommend not using a die, especially if the damage is (as it often is) near muzzle on the threads. If you do, you should use a die alignment spud, available from Brownells.

    • I’ve had better luck over the years with a thread file on various bolts. A die can just make things worse, because the damaged threads are always on the end and the die doesn’t have any good threads to index on.

      • Thread files work well on coarser threads, and most bolts are Class 2A threads. Most thread files won’t be fine enough for most muzzle threads. You can, with sufficient skill, use a triangle needle file to work the threads – but as I say, you will need skill.

        Most muzzle threads for suppressors now are Class 3A threads. If you use a thread file (and even most dies) on them, you’re going to turn them into less than Class 3 threads. Many suppressors are now using the pitch diameter of the threads for coaxial alignment of the can – so if you degrade the threads, you can cause misalignment of the can, resulting in baffle strikes. Therefore, I would not recommend filing on muzzle threads if you’ve dinged the threads and you mount a suppressor on the barrel. The threads will need to be single-pointed on a lathe again.

        For a flash hider or brake – it isn’t as big a deal, and you can repair the threads with a file or die.

LEAVE A REPLY

Please enter your comment!
Please enter your name here