FM Products Foxtrot Mike Primary Arms PA FM9 Glock Pistol 9mm
courtesy mfr
Previous Post
Next Post

Look closely. That’s not an AR pistol. That’s a GLOCK-framed lower receiver with an seven-inch barrel side-charging 9mm upper. Add a pistol brace and you’re ready to rock. FM Products just announced that they’re making these exclusively for Primary Arms. Want one?

Here’s their press release . . .

Boise, ID – FM Products Inc has partnered with Primary Arms to offer an exclusive feature rich FM Products 8.5” Pistol, sold exclusively by Primary Arms $549 retail.

Developed by FM Products Inc exclusively for Primary Arms, the PA FM9 Pistol with 8.5” Forward Charging Upper Receiver, with complete FM9 Glock Small Frame Billet FM9 Pistol Lower Receiver.

FM Products Foxtrot Mike Primary Arms PA FM9 Glock Pistol 9mm
courtesy mfr

Primary Arms exclusive Glock Small Frame 8.5” FM9 Pistol:

Comes standard with an Ultra Light 8.5” FM-9 Complete 9x19mm Upper Receiver, built from the ground up to provide outstanding reliability and accuracy with a host of top tier features. The traditional M4 charging handle has been replaced with an ambidextrous, non reciprocating forward charging handle. The monolithic style has been achieved with a proprietary interlock between the upper and handguard. Every Primary Arms Exclusive FM9 Pistol comes with a complete FM9 Glock Small Frame Complete Pistol Lower Receiver.

  • Ultra Light Match Grade 41V50 Barrel with Salt Bath Nitride finish, Blast Diffuser included
  • 8.5″ Upper Receiver features 7″ Barrel with a 8.5″ Handguard for an ultra compact upper
  • Includes Premium 4340 Bolt Carrier Group with S7 Extractor and chrome plated firing pin
  • FM9 Premium BCG is ramped with M16 Profile, and has a removable weight
  • Compatible with PDW stocks & captured recoil springs
  • Standard with Premium 6.5 oz Heavy Buffer & .308 Carbine Recoil Spring
  • Patent Pending Ambidextrous, non reciprocating, forward charging handle
  • Patented Proprietary Last Round Bolt Hold Open
  • Manufactured with ISO:9001 and AS:9100 quality certifications
  • True Mil Spec GI Trigger with Melonite Coating
  • Limited lifetime warranty through Foxtrot Mike Products
  • 1.2” 7075-T6 Pistol Buffer Tube
  • M-LOK attachments at 3, 6 and 9:00 positions
  • Type 3 Hard Anodize finish
  • LPK with no MIM parts
  • Made in the USA
FM Products Foxtrot Mike Primary Arms PA FM9 Glock Pistol 9mm
courtesy mfr

About FM Products Inc

FM Products was formed to produce innovate, high quality firearm products that are within the reach of all consumers,” said Paul, VP of Operations. “We use cutting edge materials, combined with trend setting manufacturing techniques, to produce feature rich products.”

For more info on FM Products Inc check out www.fm-products.com

Previous Post
Next Post

26 COMMENTS

  1. Until I looked closely, I assumed that the lower receiver perhaps was AR compatible on the outside for the grip, but had internal Glock parts somehow. But nope, standard AR safety, trigger, hammer pin locations.

    So other than Glock mags, what’s so Glock-ish about this? It isn’t even blocky and generic looking – actually looks kind of nice.

  2. I wish TTAG wouldn’t post this stuff. What is a “Glock framed” lower? You don’t even bother explaining. It just looks like an AR pistol with Glock mags :/

    • I think what makes this different is it’s designed from the ground up as a 9mm AR pistol maybe? That’s my best guess.

      Most of the 9mm ARs look funny to me. Mag well is extremely disproportionate to the size of the mag etc.

      If it’s really under $600 then I’d buy one.

      EDIT: it also looks like it’s blowback operated. Is that true for most 9mm ARs?

  3. I too believe these will be BATFE targeted firearms .I’m beginning to apprehensively fear that much tolerance and acceptance is going to be needed to retain ones life and process firearms in the near future. … ” Your perception of an unjust law is just that! It’s your ‘perception’ of THE LAW as unjust”

  4. Why why why hasn’t Glock seen the obvious demand for a “Glock Carbine” yet? And we thought they were dragging their feet on producing a 9mm single stack….

    If Glock made their own carbine for an MSRP of <$700 or so it'd be an instant hit. Just look at the Ruger PC carbine.

  5. Misleading marketing much? I get that they want to differentiate this from something manufactured as a ‘rifle’, but a “Glock lower receiver ” this isn’t. It’s an AR pistol that accepts Glock mags without modification…but it’s purely an AR lower just the same. By this logic an AR factory built to accept M14 mags would consist of an “M14” lower and a proprietary .308 upper.

    Part of the beauty of the AR system is that the two ‘halves ‘ of the weapon are separate, facilitating not just unparalleled modularity, but a whole paradigm of ‘upper’ and ‘lower’, which has lead to some interesting derivatives, such as this…why deny this in the marketing?

  6. Actually, buying into firearms that may be NFA items in the future could be a profitable idea. If the supreme court says that they can not take them away, you could get grandfathered rights and the value would go up.
    Not a scenario I want, but if I wanted it, I would buy it and use it and not worry about what could happen.

LEAVE A REPLY

Please enter your comment!
Please enter your name here