Fix It Sticks Announces the Handy New All-In-One Torque Driver Kit

Have you ever mounted a scope on a rifle? How about a new forend on an AR-15? Have you ever fat-fingered it and stripped a screw or hex bolt? It’s maddening.

To do it the right way — especially when attaching a scope mount or rings and tightening down a new optic — that means using a torque wrench. But sometimes you have to make adjustments when you’re in the field or at the range, and they’re usually relatively large and not something that’s easy to carry with you on a regular basis.

Fix It Sticks has a solution. Their new All-In-One torque driver comes pre-set for six of the most often-used torque settings (from 15 to 65 in/lbs) in a kit that’s small and light enough to pack in a range bag.

The driver itself (below) is priced at $60. The All-In-One kit pictured above is $112.

Here’s their press release . . .

Chicago, IL- Fix It Sticks, the industry innovator of modular firearms maintenance tools and torque limiters has introduced the All-In-One torque driver.  Available in a complete kit or individually, the All-In-One provides six torque values most commonly used by expert and professional shooters into one compact driver.

Using the All-In-One is quick and easy because there are no settings to adjust or hassle with before use. Simply install any ¼” bit or socket as needed and tighten the fastener until the proper torque is achieved.

A precise, graduated torque scale is laser etched on the side to indicate the torque value as it is applied. The settings marked on the side are 15in/lb, 25in/lb, 35in/lb, 45in/lb, 55in/lb and 65in/lb.  The All-In-One can also be used to apply torque in between the specified settings by watching the in/lb indicator as torque is being applied.

Fix It Sticks All-In-One Torque Driver Kit from James Wener on Vimeo.

The new All-In-One Torque Driver kit comes with the Fix It Sticks T-handle wrench. This wrench works with any ¼” hex bit and is designed for portability or for using either as a standard T-handle, or bits can be inserted into the opposing T-handle ends for more torque. Included with the kit are a ½” socket and fifteen ¼” hex bits commonly used for scope mounts, actions screws and other firearm accessories.

The entire kit is contained in a zippered soft carrying case with a molded bit holder designed to securely organize any bit or accessory with a standard 1/4″ base, including Fix It Sticks Torque Limiters. The All-In-One Torque Driver works with any ¼” hex drive or hex bit.

Perfect for use at the range or in the field, the complete All-In-One Torque Driver kit has an MSRP of $112.00 and the individual All-In-One Torque Driver has an MSRP of $60.00. Both are now available. For more information visit:  https://store.fixitsticks.com/collections/all-shooting/products/multi-torque-driver-kit