Lyman’s A-ZOOM StrikerCaps Don’t Eject During Dry Fire Practice

Courtesy Lyman

Do you do dry fire practice at home in your spare time? If not, why not? It’s one of the best, easiest ways to improve your shooting. One of the problems some shooters have with dry fire, though, is they either 1) don’t want to pull the trigger on an empty chamber, or 2) don’t like chasing ejected snap caps around the room.

Lyman has a solution for both objections. Their new A-Zoom StrikerCaps don’t have rims, so won’t be launched by your semi-auto pistol‘s extractor. They also have a rubber O-ring to keep them in the chamber as you move the pistol around (just pop the StrikerCap out with a cleaning rod when you’re finished).

Here’s Lyman’s press release . . .

Lyman® Products A-Zoom StrikerCaps Makes Dry Fire Training a Snap

Dry fire training is the best way to become familiar with a firearm and A-Zoom is the best choice.

Middletown, Conn. (April 2019) Lyman® Products is pleased to announce the addition of A-Zoom StrikerCaps to their popular line of safety training, function testing and dry firing practice. For traditional snap cap dry fire practice in striker fire type pistols, the slide must be drawn back to cock the pistol, which then extracts and ejects the snap cap from the pistol. Lyman’s new A-Zoom StrikerCaps are made without a rim and are equipped with a centering O-ring which grips the chamber walls and keeps the snap cap in place in the chamber.

AZoom 9mm.jpg

Trevor Mullen, VP of Global Marketing and Business Development for Lyman Products, explained, “You simply chamber the A-Zoom StrikerCap, then rack the slide to cock the pistol and the StrikerCap absorbs the firing pin hit just like our other standard A-Zoom Snap Caps. But the StrikerCap stays in place, so you can keep on practicing your trigger control and sight picture without having to stop your practice and find your snap cap and rechamber it.”

Using A-Zoom StrikerCaps while practicing dry firing or function testing a pistol after repair or cleaning will prevent damage to the firing pin and/or the barrel breech block with repeated trigger work. The A-Zoom StrikerCaps are precision machined from aluminum with a cushioned primer for repeated cycling and shaped exactly like an actual loaded round for accurate loading and feeding, yet finished in a bright training orange color to clearly discriminate it from a live round.

The new Lyman A-Zoom StrikerCaps are available for .380 Auto, 9mm, .40 S&W and .45 ACP in two per packs starting at $8.98 retail.

Stay up to date with Lyman Product news on their FacebookYouTube and Instagram pages.

About Lyman® Products:

Lyman Products, founded by avid outdoorsman, William Lyman, has been innovating firearms and reloading accessories and gear for over 140 years. Today, using advanced technologies, Lyman is in the forefront of meeting the needs of shooters and reloaders across the world. Whether pioneering the use of digital technology in reloading tools or reintroducing “antique” calibers and bullet molds, Lyman continues to improve and innovate the tools and accessories used by serious shooters and reloaders.

Lyman products and brands, are available nationally through firearms and sporting goods dealers and mail order companies. Pachmayr, TacStar, Trius Traps, A-Zoom Precision Snap Caps, Butch’s Gun Care and Targdots are also Lyman brands.

 

comments

  1. avatar Bing Crosshair says:

    I thought it was a criticism when I first read the headline.

  2. avatar former water walker says:

    I use A-Zoom snapcaps. Not so much for practicing trigger pull but to lighten up the pull. And it’s worked on my cheap Tauruses…

    1. avatar Eric in Oregon says:

      ‘Lighten up the pull’ how? If this is a joke it’s too subtle for me.

      1. avatar binder says:

        Lots of dry fire will smooth up the trigger in a lot of firearms. Another thing to do is work the slide (without the recoil spring if you can)

        1. avatar former water walker says:

          Yep it’s just polishing everything. Did it with a Taurus 85 without snapcaps by not letting the hammer down after pulling the trigger. Sorry it’s above your paygrade Eric😄😊😏

        2. avatar Craig in IA says:

          Back in “the day” it was common for people to “dry fire” their S&W revolvers by pushing forward on the hammer as they squeezed. The resulting action smoothed out an already nearly perfect trigger break even more. Those old 5 screw Smiths I own have better out-of-the-box triggers and smoother actions than the current Performance Center revolvers. Time and pride back then, I assume.

    2. avatar Andrew says:

      The good ol 10000 round trigger job

  3. avatar Owen says:

    That’s a neat idea. I think I’ll take an existing snap cap and remove the rim. Thanks for the idea a-zoom!

  4. avatar Chris T in KY says:

    I mix snap caps with live ammo at the range. And work a clearing a malfunction. When ever I read someone saying they never clean their gun, I wonder what they will do when they hear a “click” instead of a “bang”???

    And of course use only snap caps at home for dry fire practice.

    1. avatar MLee says:

      People who don’t clean their guns are lazy. Period. They are the same ones that if you opened their hood, their engine oil is black, their battery terminals are corroded, the washer bottle is empty, one headlight is out and the wiper blades, those aren’t wiper blades, it’s garbage that smears the water around.

      There is NO good excuse except pure laziness to not clean your weapon.

      Don’t want to clean their weapons, fine by me. Take another bong hit and spare me the lame excuses.

      1. avatar GabeinTX says:

        You sound triggered.

  5. avatar BlakeW5 says:

    Surprised it’s taken this long to come up with such a thing. Hunting down and loading snap caps was always the biggest pain. Just started practicing on empty chambers.

    What they really need are fake weighted mags to simulate the heft of a loaded gun while practicing. Probably cost prohibitive for manufacturing the necessary molds though

    1. avatar Specialist38 says:

      Someone makes one for Glocks

    2. avatar merlin says:

      simply fill your mag with the aluminum a-zoom snap caps.

      1. avatar techs says:

        a) Aluminum snap caps don’t replicate the weight of loaded ammunition. I use brass dummies, but didn’t find them for sale when looking for a 9mm set recently. Brass is heavier than loaded ammo, but you can creep up on the weight you want and I think heavier is better for practice anyway. I have not seen the inert brass rounds with color marking (except for the rubber primer), so extra caution is needed if you possess any live ammo with brass jacket bullets.
        b) For the problem identified by BlakeW5, filling a magazine with rimmed inert rounds behind a rimless snap cap just gives him/her an opportunity to practice clearing double-feed malfunctions. Then chasing the ejected dummy rounds under the sofa or around the range.

        A weighted dummy magazine would be a solution. Another path would be a partial load of brass dummies with a device to block the follower down — so it would not lock the slide and the slide would not pick up a new round. Meanwhile, I use a press-check reset instead of a complete rack of the slide.

  6. avatar Chris. says:

    1) don’t want to pull the trigger on an empty chamber

    Why exactly? Sure on rimfire stuff – but anything centerfire why?

    1. avatar Thomas Mikelson says:

      Because on many pistols if the firing pin doesn’t hit a primer, the force of the hammer or striker spring will drive the shoulder of the firing pin against the firing pin hole in the slide. Over time this can either work harden the shoulder of the firing pin and cause it to become brittle, or peen and deform it.

    2. avatar MLee says:

      Most modern firearms can be dry fired. Simply check the owners manual. My Ruger SR22 can be dry fired as can my P229

    3. avatar BustaClays says:

      It’s ok, newtons third law is hard to understand for most. You’ll get there someday.

      Spoiler alert, if your firing pin isn’t stopped by a primer, something stops it. People’s ignorance of physics or hopes and dreams don’t bring a firing pin to rest.

      1. avatar merlin says:

        hmm … i guess the sarcastic comment to an honest question makes you feel good ?

  7. avatar ORCON says:

    Yaaaaaaaay! Another product for flat earthers, space is fake, anti-vax , and anthropomorphic global-warming types. I cant wait to not buy one.

    1. avatar Eric in Oregon says:

      Useful for guns like the Beretta 3032 where the firing pin *will* break if dry fired with nothing in the chamber.

      Oh sorry, did I ruin your edgy snark?

    2. avatar merlin says:

      moronic comment from the peanut gallery.
      thanks for the entertainment.

  8. avatar techs says:

    I use inert rounds/snap caps to practice malfunction drills. I *want* the rims in order that they will chamber, extract, and eject properly.

    For dry fire practice, I use a laser cartridge without rim. https://smile.amazon.com/gp/product/B077Q8RXB9/
    A bit more $$, but to me there is a difference between proper trigger manipulation and proper manipulation while maintaining sight alignment. And for building speed, I’m not sure how you would have any idea where you point during dry fire without light.

    In dry fire practice, I don’t fully rack the slide to reset the trigger. With SA, I manually thumb the hammer. With M&P, a press check is enough to reset the trigger. So I practice with laser cartridge in the chute, and a mag full of solid brass dummies. All the balance of a loaded gun, feedback on sight alignment, no cartridges under the sofa, and no empty mag slide lock. Shortcomings: no recoil; no followup shot; need to maintain reflexes of fully and properly operating slide when necessary; cost of a couple boxes of duty ammo.

  9. avatar Andrew Lias says:

    Cool idea, it’ll give me something to make in the lathe.

Write a Comment

Your email address will not be published. Required fields are marked *

button to share on facebook
button to tweet
button to share via email