Video of Franklin Armory’s Providence Non-Semi-Automatic Carbine In Action

Yesterday’s announcement of Franklin Armory’s new Providence non-semi-automatic carbine design prompted plenty of speculation about how it works in the comment section. Now Franklin has posted a brief video of the prototype in action.

Check it out.

comments

  1. avatar Zach Davidson says:

    Looks like the trigger draws the bolt back and releases it…? Like some kind of single shot open bolt double action only semi semi auto sort of thing.

    1. avatar Michael Scott says:

      That’s what she said?

  2. avatar CHLChris says:

    It cant fire on an open bolt, so drawing a bolt back and releasing it to fire sounds a little too close open bolt firing to me. Plus, the trigger would be a nasty amount of weight.

    1. avatar hal_greaves says:

      If there is no gas system or any way for the bolt to cycle, then it really wouldn’t matter what condition the bolt is in when it’s fired. So, in theory, it can fire from the open bolt.. As long as there isn’t any realistic way of it to actually cycle, then the ATF doesn’t care.

      1. avatar barnbwt says:

        That would make sense, but you’d also be mistaken. If it fires upon chambering the round…ist verbotten.

        I’m guessing they have a normal hammer FCG, but the trigger cams the bolt back then releases it to go forward *before* the sear releases the hammer.

        I guess it’s slightly better than a Volcanic style lever action (same idea but without the springs, so your finger has to ‘work’ in both directions)

        1. avatar E says:

          So, a thought I have as to how it might function: Given Franlin Armory’s history with binary trigger, I think this utilizes a locking bolt mechanism, double function trigger.

          I think that, watching the video, the trigger pulls the bolt back against the bolt carrier and spring, once it exceeds a draw it disengages the carrier, propelling the carrier forward, loading a round, and I assume priming the firing pin.

          Then on allowing the trigger to move forward, it resets the trigger and releases the firing pin.

          This gets around the open bolt issue by not firing from an open bolt, but technically from a closed bolt position.

          While the trigger pull weight doesn’t seem like it’s excessive, I’m guessing that there is substantial trigger pull distance by the look of how his finger is moving back to full extent after each round. If correct, then the length of a given round will be limited. Works out for pistol caliber rounds, though.

    2. avatar Broke_It says:

      I’m wondering if the gas is used to work all the internals excluding the carrier. That way the trigger pull is more tolerable as you’d be moving the bolt carrier rearward but under reduced spring pressure. In that case not only does it take glock mags but it probably feels like a glock trigger as well.

      1. avatar TruthTellers says:

        It’s a PCC, there’s no gas, blowback only.

        Trigger draws bolt back, releases bolt and slams it home (possibly a fixed firing pin on the bolt???) and the blowback action ejects the case and feeds a new case into the chamber.

        1. avatar Broke_It says:

          I forgot it was a PCC. It’ll be interesting to see what their obvious “secret sauce” is…

        2. avatar Gustavo giggle says:

          That is the way it looks, however it would still be a self loading rifle (semi automatic) you would just have a trigger that would operate double action only Instead of the returning bolt cocking your hammer. Maybe the trigger pull is unlocking the bolt and able to provide enough energy to load the next cartridge from the magazine upon return. The bolt movement is being shown completely independent of any gases being produced from firing a cartridge, that would rule out blowback or any other system using the gases of the spent cartridge.

    3. avatar Gustavo giggle says:

      If the trigger pull draws the bolt back and releases it than it’s not open bolt. Open bolt would mean the bolt would be locked open between trigger pulls and the trigger pull would release it.

  3. avatar Aaron Walker says:

    ….”Assault Musket…”
    ….”Cap & Ball military carbine…”

    1. avatar jsallison says:

      Still waiting for my lever action bullpup.

  4. avatar Steve Eisenberg says:

    Revolvers are semi-automatic.

    1. avatar No one of consequence says:

      Only a very few.

      1. avatar B-Rad says:

        No, very few of them are not. Semi Automatic–single discharge per pull of trigger.

        1. avatar Red in CO says:

          You’re mistaken. That’s the effect of a semi automatic action, yes, but the definition of semi auto is mechanical. It’s only a semi auto if a portion of the energy from discharging is used to reset the firing mechanism, which is my what a revolver does.

          Or, to put it another way, if there are no internal parts that are designed to move after a round has left the barrel, it’s not a semi auto.

        2. avatar Red in CO says:

          *not what a revolver does

          Damnit TTAG, get your shit together! Fix the edit button!

        3. avatar ollie says:

          Yo, Red…….After suffering for years at the hands of Grammar Police the TTAG editors are getting their revenge. Don’t expect the button to return any time soon. Not that YOU are a grammar cop, all must pay for the sins of a few.

        4. avatar Fred Johnson says:

          After the first shot is fired, a semi-automatic gun automatically loads the CHAMBER using the energy of the fired cartridge. Semi-autos are also known as auto-loaders.

          A typical revolver’s CHAMBERS are loaded manually by the user and the action is manually cycled by the user either by pulling the trigger or cocking the hammer, depending on the type of revolver.

          Typical revolvers do not use the energy of a fired cartridge to load the chamber of the gun or rotate the cylinder to bring the chamber in line with the barrel. Therefore, a typical revolver is not an auto-loader nor a semi-automatic gun.

      2. avatar GS650G says:

        Only the Webley saw any commercial success and it was a jam-o-matic

    2. avatar joel says:

      looks like a modified revolver action to me. brilliant. pulling the trigger cycles the action and releases the firing pin. gotta love Merica!

  5. avatar Cooter E Lee says:

    I watched video but I don’t get it.

    Are they defining “semi-auto” as an “auto loader” and saying they aren’t a semi auto because the trigger pull is the action? I think most gun grabbers will define “semi-auto” as one trigger pull per round, they won’t care if it autoloads or rotated on a DA revolver.

    I still love this stuff. Nothing better than a pistol with brace shooting a drum with a bump stock into tannerite to spite the ATF.

    1. avatar California Richard says:

      California penal code says “semiautomatic” means: “A firearm where the operating mode of which uses the energy of the explosive in a fixed cartridge to extract a fired cartridge and chamber a fresh cartridge with each single pull of the trigger.”

      Technical terms and legal terms are two different things. What ever the real definition of “semiautomatic” says, this gun was designed to get around legal definition.

      1. avatar neiowa says:

        So idiotic prog gimcrack? NO.

        1. avatar California Richard says:

          You’re going to have to translate that in to English for me. I’m don’t have twitter, facebook, etc, so I’m illiterate in internet shorthand.

      2. avatar Stinkeye says:

        And within a month or two of this gun’s release, the legal definition of “semiautomatic” will be changed to accommodate how it works, and we’re back where we started.

        Neat innovation, but ultimately kind of pointless as a legal workaround. Now, as an action that can be used with lower-powered rounds without worry of not having enough energy to cycle the action, I can see it’s utility. That’s why I love revolvers and lever actions. You can load 44’s down to almost-suppressed levels of quietness out of a lever-action carbine for fun plinking or training first time shooters. Being able to do that with a 9mm PCC platform would be super cool.

        1. avatar California Richard says:

          It would be good for any 9mm as the timing isn’t slaved to recoil impulse vs reciprocating mass. It also completely eliminates ejection port bark that seems to be common with all 9mm PCC’s.

  6. avatar Rusty Chains says:

    Sure looks like the trigger unlocks the bolt then pulls it back until it slams forward to fire the gun with spring pressure. That is going to be a real work out for your trigger finger!

    1. avatar California Richard says:

      We will see, but it cant be more than a revolver. If this thing had a wolf PCC/308 spring, 12.8oz buffer, and a weighted BCG then, ya, it would kill the trigger finger. What interests me is the type of locking/timing this thing has to keep the bolt forward on ignition.

      1. avatar Jason says:

        Looking at the video, that would seem to be a problem. There appears to be considerable bolt bounce. I’d like to see live fire video.

        1. avatar California Richard says:

          I saw that too. This could just be a mocked up gimmick to troll anti 2nd ammendment pols and Fudds.

          I’m still interested though. It skirts California law, the action noise and muzzle blast are contemporaneous, and it completely eliminates the recoil operated ejection port “bark”. If it has a trigger pull similar to a revolver DA pull, I’m okay with that considering the benefits.

  7. avatar former water walker says:

    But does it have a shoulder thingy that goes up?!? Ar15’s aren’t real ASSault rifle’s either. If it looks like a duck…

  8. avatar Andrew Lias says:

    anything that sticks it to da man.

  9. avatar BatPenguin says:

    I am just talking out loud and I usually over think things so I am probably wrong. What if the trigger activates an electrical motor that initiates the striker and then a motor ejects and loads the next round? It wouldn’t be using any of the energy from firing of the ammo to cause it to load again, would that then be able to be considered a non-semiauto?

    1. avatar Chris Mallory says:

      I thought that in the past the ATF said crank operated firearms were acceptable, as long as the crank is manually operated. Attach a drill or other motor to the crank and it became NFA. Not sure how they would rule on your example.

  10. avatar jwtaylor says:

    Yay innovation.

    1. avatar Green Mtn. Boy says:

      Statist Marxists legislate and Freedom finds a way.

  11. avatar The Tabasco Kid says:

    Looks like the MARS (Manually Activated Release System) trigger that is for sale in England
    https://ukshootingnews.wordpress.com/2016/06/09/police-force-is-warning-shooters-not-to-buy-mars-actions/

    1. avatar Brodirt says:

      MARS requires 2 trigger pulls for each shot I believe.

    2. avatar UsedtobePun says:

      The comments on that article from the UK…wow. Brits are most definitely not Yanks, although there are some in there with fighting spirit to be sure.

      Love the guy who thinks all magazine fed weapons “should be slow to load the next round” by design. He prefers single shot bolt actions with no magazine.

    3. Pay close attention to the Nicholas Harman character in the comments. There are people like that in the US and they are worse than any Fudd. They are the ones who’ll sell you up the river (or sell you out to the authorities) if it saves their precious bench gun from the saws and torches. A textbook Quisling.

    4. avatar GS650G says:

      First, I’m shocked, shocked I tell you, there is anything such as UK Shooting News in existence.

      And the article describes an out of control State that can do anything it damn well pleases.

      We’ll be there in a few years.

    5. avatar GS650G says:

      https://ukshootingnews.wordpress.com/2017/10/03/heres-why-british-firearms-licensing-law-stops-nutters-getting-guns/#more-10261

      TTAG could do a article on this alone…….

      Frightening stuff and they seem to be Ok with it all.

  12. avatar raptor jesus says:

    black magic fuckery

  13. avatar dwb says:

    ok, now I get it.

    But gimmick guns are not a thing. Stopping unconstitutional infringements are a thing. So, instead of buying a gimmick gun to say fuck you to the legislators, instead donate that $$$ to organizations that actually fight for rights.

    1. avatar Tom T says:

      Well said. I have watched people stick $1k of gadgets on a single rifle, but won’t give $20 to GOA or NAGR.

      1. avatar strych9 says:

        I’ve seen people who invest thousands upon thousands in guns but won’t cough up a couple bucks to change the batteries in their smoke detector.

        1. avatar possum says:

          Some people count bullets and can’t afford batteries, some people can’t hear whistles and hi pitches. So a smoke detector wouldn’t help them much. Perhaps an automatic deluge system, and just drain the swamp through shear volume with attending rapid run off.

    2. avatar Specialist38 says:

      Unless you want a gun…..

    3. avatar GS650G says:

      Organizations are great at challenging laws in court and sometimes they win. What they can’t do is stem the tide of votes and politicians who pander to them. The media, educational institutions, the immigrants both legal and illegal, the foreign countries, etc are all against Americans owning guns freely. Frankly I’m amazed we have managed to get this far.
      The question is how is it all going to come to a head and what are they planning to do to enforce a ban on it all?

  14. avatar Cucamonga Jeff says:

    It’s a double action rifle…. 🤔😦

    1. avatar little horn says:

      yep pretty damn stupid. accuracy on this is going to be horrible.

      1. avatar jwtaylor says:

        There’s no reason the accuracy has to be poor. It has a charging handle. There’s no reason the first part of the trigger squeeze couldn’t release the firing pin, making for a very light trigger. The rest of the trigger squeeze could cycle the bolt.

      2. avatar California Richard says:

        Yep… damn guns actuated with the trigger finger must have horrible accuracy… https://youtu.be/jJ3XwizTqDw or…. https://youtu.be/hk4RPsn8Zfs

    2. avatar Bill says:

      Agreed! Also has a quarter mile trigger pull. Yuck..

  15. avatar Brodirt says:

    18 USCS § 921(28)- The term “semiautomatic rifle” means any repeating rifle which utilizes a portion of the energy of a firing cartridge to extract the fired cartridge case and chamber the next round, and which requires a separate pull of the trigger to fire each cartridge.

    This means no gas system or recoil system.
    Perhaps there is a mechanism that is recapturing the energy of the falling bolt, with your first charge, like in any semi-auto you start the system but your trigger release has the bolt operating like an open-bolt?

    1. avatar Mad Max says:

      The DOJ and ATF will find a way to twist the law to make “semi-automatic” apply to this rifle.

      I hope the SCOTUS hands the ATF their heads.

      1. That’s been my thought all along after reading about this. If the ATF can’t designate these things without legislation, then we can expect passage of such legislation in short order.

      2. avatar 22winmag says:

        Don’t count on it.

        Judges like Trumps boy Kavanaugh are lefty liberals in sheeps clothing.

        Kavanaugh sided for Planned Parenthood and against several states in his very first ruling.

        1. avatar Sam I Am says:

          “Kavanaugh sided for Planned Parenthood”

          Please read the actual ruling. The SC (Kavanaugh included) determined the law did not permit anyone but the US legislature to make the changes to funding. That is not the same as “siding” with PP. The case also did not permit the SC to abolish PP, or forbid Congress from writing laws that permitted PP from qualifying as a Medicaid provider.

          There is a new case just out of the 5th Circuit that permits states to determine who may be qualified as a provider. Different facts; different theory of the law.

          SC is to consider review of the DACA executive action/order abolishing the illegal Obama executive order/action establishing a citizenship path for children of illegals. The lower courts have held that the president may not overturn an illegal executive order through use of an executive order. Reporting seems to indicate SC will dodge the issue. If so, THAT will be telling.

    2. avatar Rob says:

      “Extract” *and* “Chamber”.

      So this could, in principle, only do one of those via gas and not be semi-auto.

      1. avatar Nick says:

        The Brits already have the workaround guns for that. Basically, a LRBHO for every shot, but regardless of whether the mag is empty.

        I’m thinking one could have a long pull trigger that drops the bolt, then continued motion fires it, or two separate triggers with the one dropping the bolt able to travel all the way rearward until firing.

  16. avatar O2HeN2 says:

    Since we don’t get to see when in the trigger press process the shot is actually fired, here’s my SWAG: It’s a closed bolt. The trigger first fires the round (this would make it a “typical” trigger pull to fire a shot), then the rest of the pull (very heavy) cycles the bolt.

    The energy of the round firing is not used in any way, therefore it’s not a semi-auto.

    1. avatar CHLChris says:

      If this is the order (glass break at start of trigger to fire the round in the chamber which stays closed after bullet exits, then rest of trigger pull extracts and loads next round) that would be cool. The heavy part of the pull wouldn’t affect the aiming and the single action first stage could be left without cycling the action, leaving an unloaded rifle with a fired case in the chamber. This could be a great type of action!

    2. avatar Some dude says:

      I think you’ve got it!

    3. avatar Anymouse says:

      I’m guessing slight variation based on Franklin’s binary triggers.
      1) pulling backwards on the trigger unlocks the bolt and pulls it back.
      2) when trigger reaches end of rearward travel, the bolt is released, and it loads a round as spring pressure pushes it forward and locks to the barrel
      3) moving the trigger forward releases the firing pin, launching the bullet, and keeping the breech locked
      Step 2 would tend to limit this action to a handgun since rifles would require twice the bolt movement, which would make trigger pull twice as heavy unless the spring pushing the bolt was half the strength, which would make the loading of the next round less reliable.

  17. avatar RockOnHellChild says:

    This, two world’s fairs, and a goat f*ckin’… now I’ve seen it all.

    1. avatar Cory C. says:

      Hahahahaha. That’s the funniest thing I’ve read in a while.

  18. avatar What about...? says:

    One of these days inventions like this are going to make all anti-gunners go off the crazy train, rip up the constitution with their teeth and scream,

    “That’s enough of the work-arounds, compliance gadgets, and loopholes, we’re banning all guns, everything that looks like a gun, sounds like a gun, even if it isn’t a gun-gun, turn them all in now or die!”

    Then I want to watch the anti-gunners wet their pants.

  19. avatar little horn says:

    LOL no thanks

  20. avatar Robroyb says:

    Looks great to me. Cause.. guns are fun!!

  21. avatar Ed Schrade says:

    It will be a ghost/loophole/fully automatic/military style/ semi automatic/weapon of mass destruction. This scary machine gun would fire a gazillion exploding bullets per second and will be the preferred weapon of drug dealers and criminals and will also increase global warming. The sky is falling ! sarc

  22. avatar Johnny B says:

    I’ll be interested to read more, as long as it’s not by the guys who covered the Reformation last year. Well below the standards set forth by this site prior to that.

  23. avatar Soylent Green says:

    linear “revolver”? Trigger pull fires and then cycles the action?

  24. avatar Asdf says:

    Looks like a trigger actuated lever action. If so, it is going to be difficult to use longer cases.

  25. avatar Tex300BLK says:

    Is it just me or does the silhouette of their logo look kinda like a chode?

  26. avatar Hannibal says:

    Cool, but it will probably take about 5 minutes for states like CA, NY and NJ to make their definitions of ‘semi-automatic’ much simpler: “Any gun which fires one cartridge for every activation of the trigger and is capable of holding more than two cartridges.”

  27. avatar Nate From the Land of Townships says:

    It’s all fun and games until the narrative changes. ‘Yesterday’ they wanted to ban fully automatic firearms. ‘Today’ they want to ban semiautomatic firearms “modified” to fire “at a similar rate to fully automatic fireams”. ‘Tomorrow’ there will be calls to ban all semiautomatic firearms. After that, they will push to ban firearms that “fire at a similar rate to semiautomatic firearms” i.e. pump actions, lever actions, and things like this. When talking about firearms with anti gun people that I know, I have had more than one person tell me that lever action rifles like Winchester 1873’s and 94’s should be banned after seeing cowboy action shooting videos because they are disturbed by how fast competitors can work the action.

    1. avatar Green Mtn. Boy says:

      Duce Stevens is the man with a lever gun.

  28. avatar Sam I Am says:

    To all who are gathered here….

    Outside the US constitution (post-1868), all law regarding guns is simply legislation. That means all the gun laws, yes all of them, are susceptible to change based solely on majority opinion in one form or another. Agency rules and regulations can have the effect of law, but simple legislation can foster or negate agency rules and regulations.

    Now, we love to put our hopes in the court system (just like all the Leftists/liberals/statists) to give us what we cannot obtain through the legislature, but at the root is majority opinion expressed through voting by the people, representation by elected officials, resulting in simple legislation.

    The fault is not in our stars, but in ourselves. We are unable to muster a solid, insurmountable majority of voters who have any point of interest regarding firearm ownership. While we benefit from the random “victory” over the anti-gun mafia, overall the winds are at the backs of that same mafia. The issue underlying all anti-gun legislation (existing laws) is that the majority of voters keep returning gun-grabbing politicians to office. The voters have the power to vote politicians out of office as reward for restricting gun ownership. Why does that not happen frequently enough such that no one would publicly express an anti-gun opinion?

    Looking about, it is clear the majority of voters find that the Second Amendment is of little value to the public. Who would not trade some more immediate benefit in return for further erosion of “gun rights”? Does that demographic represent a solid, insurmountable voting block? I think not.

    Our message is, at best, maintaining the status quo of a near 50-50 split on preserving the Second Amendment as it was written. Why are we failing?

  29. avatar Alan says:

    No way that I’m going to go to the Shot Show, though it might be interesting. That said, re this non-semiautomatic firearm, what sort of doubletalk are we being treated to now, or might one ask what sort of baloney is being inflicted on us.

  30. avatar Mad Max says:

    It kinda looks like a double action revolver trigger attached to a gear box to operate the bolt and cycle.

    Interesting.

  31. avatar Broke_It says:

    It’s cool and all, but where’s the switch to make it go full semi-auto?

  32. avatar 22winmag says:

    Can gas simply (and only) function to unlock the bolt without running afoul of the “chamber” and “extract” clause?

    If so, and no trigger finger energy is expended unlocking the bolt, I bet the trigger gets the bolt to the rear with the help of one spring that functions only to draw the bolt rearward, then disengages, and is followed by another spring that functions only to cycle the bolt forward, then disengages.

    Since there is no recoil system, these two springs can be called “non-recoil dual one-way bolt-cycling springs.”

  33. avatar Sora says:

    It’ll get banned anyway.
    The goal has always been to disarm the citizens into subjects.
    It’s like the sheep trying to give the wolf an excuse not to be eaten.

    You shoot the damn wolf, or whoever paid it to eat the sheep.

  34. avatar AP says:

    Upon watching the video, the bolt travels back at the same speed and distance as his trigger finger. I agree with the theory that the initial pull releases the firing pin, and then the rest of the travel pulls the bolt back to load the next round. It makes further sense that this is a pistol caliber, a much longer rifle cartridge would require a much longer trigger pull.

  35. avatar GS650G says:

    It works like a revolver in operation in that the double action trigger completes the full cycle. Pretty clever.
    And they will merely tack it onto whatever gun ban legislation the come up with. It’s easier for them to ban something with a paragraph than to innovate.

  36. avatar Rob94045 says:

    While it’s not something I’d want to depend on, they could be using a battery powered electric assist so that the trigger pull is less offensive.

  37. avatar Vlad Tepes says:

    I bet this gun lasts all of 10 seconds on the market before States like California and Massachusetts just modify their already anti-gun laws to include this as a semi-auto even though technically it is not. But what anti-gun State ever ruled honestly on any gun issue or regulation.

  38. avatar skiff says:

    Progressive Mayor of Providence Rhode Island, Jorge Elorza would wet his panties if he found out about a carbine named Providence.

  39. avatar Eng says:

    Upon firing it could operate like a blowback, extracting the spent case and cocking the hammer, but the bolt gets locked back. Trigger pull could have two stages, first stage releases the bolt, loading the next round. The second stage could release the hammer.

    This would be a different mode of operation than described in many laws that describe semiautomatic firearms, usually specifying that the rifle unloads and loads itself using energy from the shot.

    1. avatar Eng says:

      Or maybe energy from the shot could be used to cock and lock the recoil spring, allowing the bolt to move back with less force from operation of the trigger.

  40. avatar Libertarian says:

    Looks very slow in repeating i think it need an bumstock 🙂

  41. Subsonic and suppressed, this platform could be very quiet relative other options.

    But where does the brass go? And how is it extracted? Must be during the trigger pull.

Write a Comment

Your email address will not be published. Required fields are marked *

button to share on facebook
button to tweet
button to share via email