Just Arrived from Taurus: View Revolver

041314_D7C_7076_72

Technically, Taurus calls their wee new wheel gun the 85VTA Revolver, but you probably know it as the View. It may be the snubbiest snubster you’ve ever seen. With that minuscule 1.41″ protuberance of a barrel and an uber-compact grip, there’s hardly a pocket it won’t happily call home. But besides its diminutive size and 9 oz. weight, (by comparison, a 642 Airweight tips the scales at a comparatively portly 15 oz.) what caught a lot of eyes at SHOT was its oh-so-revealing Lexan side panel . . .

Who are we kidding, though? While the View’s svelte nature — thanks to its titanium cylinder and barrel — would seem to ensure an ultra-comfy concealed carry experience, the big question on everyone’s mind will be, how (painfully) does she shoot? I can’t wait to find out. In the mean time, if you want to see how the View compares size-wise to a standard small-framed Model 85, feast your eyes…

041314_D7C_7080_72

comments

  1. It is the LCP of wheel guns!

    1. avatar Mario says:

      What’s the LCR of semiautos then?

      1. avatar Colby says:

        LC9, M&P Shield, PF9, XDS9/45, et al.

        1. avatar Renegade Dave says:

          On my reply I went for something that nobody really wanted in a semi auto.

      2. avatar Renegade Dave says:

        The GLOCK 42.

      3. avatar B says:

        Probably a PM9 Kahr with their cammed trigger pull and polymer body. Maybe a CW380, no clue how tiny the grip is on an LCR. I know I freaking hated shooting the CW380 though.

  2. avatar Ahil925 says:

    This seems like a platform that would actually be a great use for the .327 federal cartridge. If made right you could use a whole slew of .32 ammo for practice and use the big stuff for defense.

    1. avatar Lolinski says:

      Shouldn’t you use at least an 4 inch barrel because of velocity?

      I do like the .327, you can switch cylinders to go from .327 to .32 acp. Assuming you have them made.

  3. avatar rammerjammer says:

    Ahhhh, now I can see the shoddy workmanship without having to disassemble the gun.

    1. avatar Gov. William J. Le Petomane says:

      Also, the gunsmith at Taurus’ repair center won’t even have to take it apart before returning it without doing anything the first time you send it back.

    2. avatar emfourty gasmask says:

      I would say recent Taurus revolvers are worthwhile. I’ve got a .357 Tracker I use for hog hunting that has been nothing but a pleasure to shoot and has never given me a single issue. They cleaned up their act alot once they got the Beretta tooling.

      1. avatar Sean N says:

        When they got the Beretta tooling…. 34 years ago… has affected how they build revolvers..

      2. avatar Gov. William J. Le Petomane says:

        I give them crap, but my PT709 has been trouble free, not even a single jam. They seem to have a reputation for making you send in your faulty firearms twice before they fix it though.

        You get what you pay for, Taurus makes cheap guns cheap.

  4. avatar Gregolas says:

    No matter what, the shooting experience has got to be less painful than watching “The View.”

  5. avatar Clem says:

    Remember the revolver from Who Framed Roger Rabbit?

  6. avatar Nate says:

    I wonder what velocities you will be getting out of this lil bugger lol

  7. avatar Gov. William J. Le Petomane says:

    As someone who wears XXL gloves, I don’t think I’ll be in the market for ‘the view’.

    1. avatar Gene says:

      Yeap, I was just wondering how you hold that thing.

  8. avatar Cindy B says:

    Just what we need – another ADHD ‘trigger’ (pun intended) to get someone else shot. Can you imagine being on the support side of the shooter in the adjacent shooting lane when someone says “hey, watch this neat stuff here” (think ….SQUIRREL!!!) while pointing it sideways for his buddy to look at – all the while forgetting to turn downrange and that it’s loaded? Way to go, Taurus. Please tell me this is a joke.

    These are potentially deadly devices, not toys. Save the cutsie BS for videos on your website, please!

    1. avatar Layne says:

      My first thought exactly.

    2. avatar TheBear says:

      Calm down.

      I think it’s pretty cool.

      And if all gun design were created with the lowest common denominator in mind, we’d all fire our guns via 10 foot string while it stays in a vice.

      1. avatar JR says:

        Or not be “allowed” to have guns at all.

  9. avatar 16V says:

    In all seriousness, what kind of muzzle-energy will this thingy generate with that adorable little barrel?

    Normal 2″ snubbies are bad enough, I’d love to see chrono data from this thing. Better than holding the shell in your fingers and smacking the primer with a roofing hammer, but how much?

    1. avatar TheBear says:

      I bet it will vary a lot based on the powder used in the round.

      I will probably buy one to experiment with. Plus, putting an LED inside the lexan would be really cool. 🙂

      1. avatar 16V says:

        Agreed. Something that burns fast and likely a reduced charge at that. I’d probably want to wad it somehow, just to control the flame front and burn as much as possible.

        1. avatar Leadbelly says:

          Speer makes a “short barrel” .38sp+p with a fast burning low flash propellant. I don’t know if this thing will stand up to +p or not. I DO know it would hurt!

      2. Leadbelly, Taurus doesn’t recommend using +P ammo with the view.

        1. avatar Leadbelly says:

          No sweat – I have no particular desire to buy the silly little thing anyway.

    2. avatar Another Robert says:

      Ever hear of the “knuckle duster” revolver form the 1800s? Fired the cartridges directly out of the cylinder. The solid metal handle had a hole in it, so you could use it as a single “brass knuckle”. Obviously a close-range weapon, this new thing can’t be much better. And really, I can see using something other than metal to save weight–but why transparent??

      1. avatar 16V says:

        Like an Apache revolver?

        http://www.nazarian.no/wep.asp?id=830&group_id=49&country_id=314&lang=0

        The clear is just a marketing gimmick, like a see-through caseback on a watch (‘cept the watch is waaaay more complex). Even though one can spec all sorts of really cool transparent materials (yes, transparent aluminum is quite real) you know that ain’t happening at this price point.

        1. avatar Another Robert says:

          Yeah, except the “Apaches” had a knife blade, too, and the full 5-finger set of “knucks” . I think that transparent is just goofy for something you are supposed to actually use–and keep hidden until you use it.

    3. I don’t know of any chrono testing that’s been done on a View yet. But you can head over to BallisticsByTheInch and look at their .38 Special results for a 3″ barrel. The chamber plus barrel length on a View adds up to about 3″, so it should be comparable (remember that a revolver and a semi-auto measure the barrel length differently, and BBTI uses only the semi-auto method, so you have to add the chamber to the revolver barrel to make them comparable).

      BBTI shows a 3″ barrel+chamber delivers about 831 to 963 feet per second. About the same velocity as a .45 ACP, so not too very shabby. Looking at their “real world weapons”, it looks like it may be comparable to an S&W 642 with its 1.875″ barrel.

      1. avatar 16V says:

        True, BBTI is a great resource. I’m just looking at once you get down to really short barrels, things can get weird really fast. Even a significant fraction of an inch can make 50FPS of difference, as can a few thousandths of cylinder gap. That projectile has almost no travel time with pressure behind it to accelerate.

        As the long-ago owner of a Dan Wesson Pistol Pack (and desire to experiment) I have some ideas how this will spit rounds. I just want to see the science on this gun.

  10. avatar Ross says:

    Now that’s just plain ugly.

  11. avatar CA.Ben says:

    When using reinforced concrete in buildings, engineers make the assumption that the concrete takes zero tensile stress, as a safety precaution. Similarly, the engineers who designed this better have treated that Lexan as if it will take zero stresses of any kind. Otherwise I am seeing broken side panels as a result of the cyclic loading that comes along with lots of shooting.

    I wouldn’t buy one of these until it had been on the market for at least a year without incident.

    1. avatar Stinkeye says:

      I would expect to see all kinds of alternate-material aftermarket panels to customize these if they somehow become popular. Brass might be cool, or maybe a case-hardened look.

      1. avatar CA.Ben says:

        I approve of this idea.

    2. avatar 16V says:

      Not quite sure what you were trying to say about reinforced concrete. When concrete buildings are designed there are multiple calcs and scenarios for pre-tensioning and prestressing the concrete depending on the architecture. As well as deflection under load and a cornucopia of other variables.

      But yeah, more than likely this plastic isn’t going to do well if the gun actually sees any use. Not to mention it’ll get microscratches from carry, and it won’t be so see-through any more.

      1. avatar CA.Ben says:

        In a reinforced concrete beam, there is concrete and metal. In the calculations, both take compression, but only the metal takes tension.

        Just an analogy for these panels.

        1. avatar 16V says:

          I see where you went, and for Harry Homeowner filling a Sonotube for his deck footing that’s certainly the correct way to look at it. I just used to shoot T&S with an engineer who designed such concrete stuff, and got schooled on all sortsa things one can do with cement and the panoply of additives.

          http://civil-engg-world.blogspot.com/2009/04/relation-between-compressive-and.html

          The basic calcs…

          http://stuff.mit.edu/afs/athena/dept/cron/project/concrete-sustainability-hub/Literature%20Review/Building%20Energy/Concerte%20Industry%20Reports/PCA%20CD%20Cement%20Research%20Library%202008/reports/DX012.pdf

          As to the Lexan (assuming it is Lexan brand transparent polycarb) there’s probably 200+ Lexan products in the SABIC portfolio, not to mention a thousand other polycarbs from different manufacturers. I’d wait too.

    3. avatar Hannibal says:

      I use that rule for any gun…

  12. avatar ValleyForge77 says:

    I have to say my personal experience with Taurus revolvers means I will not purchase another one.

    YMMV

  13. avatar g. boyd says:

    AAAWWW. It is like a cute little puppy that never grows up. I hate puppies.

  14. avatar Lolinski says:

    What a great view, right?

    My apologies for the bad pun, I can’t help myself.

    1. avatar Hannibal says:

      If that even qualifies as a pun Taurus got to it first…

  15. avatar TXGunGal says:

    No thanks, will stick to my Ruger LCR .38 for concealed carry pocket revolver. Not a fan of Taurus, sold the two I’ve ever owned!. LCR is not a range gun except for self imposed fire off 25 rounds a month to maintain proficiency, .

  16. avatar crashbbear says:

    I want to see one with a set of Raging Bull grips on it.

  17. avatar tdiinva says:

    This is the perfect KGB assassins gun. Walk right up behind someone and shoot him in the spine from your jacket pocket. With a a barrel that small you are unlike to hit anyone beyond 1′

  18. avatar eugene says:

    Interesting gun but not one for revolvers. any one here own or had a chance to shoot the Boberg 9?

  19. avatar eugene says:

    Never mind. Just looked at the gun reviews

  20. avatar Ralph says:

    Great! Now we can see what broke without using a screwdriver.

  21. avatar Steve S. says:

    Fugly & Taurus. But, I repeat myself.

    Taurus 1911’s aren’t bad (with some decent parts & work), but I wouldn’t give a plugged nickle for any Taurus product. YMMV, etc, etc.

  22. avatar Jay says:

    At least a Hi-point has a semi-suitable grip…

  23. avatar Accur81 says:

    Hard pass.

  24. avatar Pulatso says:

    I own two Taurus Millennium Pros. Never had a issue with either. So I don’t dismiss this out of any disdain for the manufacturer. I dismiss it because it manages to add nothing new but painfully low weight and painfully short barrell length (which would seem to both hurt to shoot yet not have sufficient velcocity to takedown a target) while managing to be really, really ugly. I already have an LCR on my “need to buy” list, I don’t think this will replace it.

  25. avatar sightpicture says:

    Ugliest cap gun made.

    Would someone please test some +p in this and get a video

  26. avatar former water walker says:

    This is a gimmick gun. You can get a tiny semiautomatic that works & runs better. This from someone who’s had 4 Taurus (Tauri? ) that ALL ran perfectly. Including an Ultralight 85revolver. YMMV

  27. avatar scooter says:

    Like the clear phones a couple decades ago…

  28. avatar jaysin says:

    Ugly yes but I would still take one. Its not about looks but about having a easy to carry firearm and this fits the bill. Also see alot of you complain about tauras revolvers I have 3 two 38 & a 357 with absoutly no issues over the last 10 yrs with them

  29. avatar Pahtun6 says:

    It seems to be a marketing gimmick, if considered this as more of a novelty, and a potential teaching tool to show new shooters how the fire arm operates. I’d like to see an accuracy test as well, plus a ballistic test like everybody else.

  30. avatar JSW says:

    Just what the world needs- more NDs, suicides, and killings by idiots showing off how their firearm works.
    No thanks, I’ll pass on this POS constructed simply to gather those who like gimcracks and doodads to show off.

  31. avatar JP says:

    AH HA, Another answer to a question they have not asked yet.

  32. avatar Dave Lewis says:

    Why?

  33. avatar Lfshtr says:

    I used to shoot marbles in a 21″ circle, wow now just bring this Taurus. Not for me, I would rather use a knife in a gun fight! Lets be careful out there, know the enemy.

  34. avatar Don says:

    I like the size and shape of it. I don’t like the window. 9mm moon clips with a short cylinder would be cool.

  35. avatar Wil Golden says:

    Load your own ammo: 148 grain HB wadcutter, upside down over 3 grains of Unique or 3.2 grains of Red Dot in a .38 special hull.

    I PROMISE it will expand, down to less than 600 fps. The loads develops 820 in a 1 7/8 inch model 60, so a 1.4 inch bbl should run at 725 – 750.

    This lists @ $599, probably go for 480 to 490 in the shop. I’m gonna get one.

    I like nasty in small packages . . .

  36. avatar Tristdunn says:

    Just picked one up for 375 shipped. Not planning on shooting just gonna watch the value go up and up as they become sought after by collectors.

Write a Comment

Your email address will not be published. Required fields are marked *

button to share on facebook
button to tweet
button to share via email